Ditek Rack Mount Surge Protector

Ditek 12-channel Rack Mount Faceplate For Versa-module Series

Product Code: ga72523
Availability: In Stock

$312.00 $499.20

Qty

5 reviews Write a review

Description
Reviews (5)

The 12-Channel Rack Mount Faceplate for Versa-Module Series from DITEK accommodates up to 12 individual protection modules, allowing them to share a single ground point and simplifying cable management when space is limited. The faceplate is sized for two rack units of height.

Accommodates up to 12 Protection Modules All Modules Share Single Point of Ground Two Rack Units of Height

General
Compatibility	DITEK Versa-Module Series
Physical
Dimensions	Not Specified by Manufacturer
Weight	Not Specified by Manufacturer

Related Questions and Answers

Q: 1. Is this item compatible with Sachtler ACE XL fluid head ?

A: The Really Right Stuff Versa Series 3 Tripod Video Bowl (75mm) is designed for use with RSS Versa Tripods, we can not say for sure that it will work with the Sachtler ACE XL. For the Sachtler ACE XL we recommend the Sachtler Adapter 75/100 75mm Ball Base to 100mm Bowl Adapter(BH #SA3906). See: bhpho.to/3BEKgui

Q: 2. why do you require a licensed electrician to install?

A: For safety's sake and to prevent electrical shock, fire, etc. Also to conform to local building codes.

Q: 3. what is the orgin of the product?

A: The country of origin for this product is China.

Q: 4. Does it work on Benro MAD49C?

A: The Really Right Stuff TA-3FB Rubber Foot for Versa 2, 3, and 4 Series Tripods should work on the bottom of the Benro MAD49C Adventure Series 4 Carbon Fiber Monopod. It uses a 3/8" thread.

Q: 5. Will this receive signal from a Bolt Pro 300 TX?

A: No, the Teradek Bolt 6 RX 750 Monitor Module for Smart 7 Series (V-Mount) is not compatible with the Teradek Bolt Pro 300 3G-SDI Wireless Transmitter-Receiver Set.

Q: 6. Will this be compatible with my Cine7 Bolt RX monitor so that it may be used with the new 4k tx systems?

A: Yes, the Teradek Bolt 6 RX 750 Monitor Module for Smart 7 Series (Gold Mount) is compatible with the SmallHD Cine7.

Q: 7. Is this device rated to protect from a lighting strike?

A: If you ground the unit, it should. This unit has a screw for ground,

Q: 8. Does this work with the bolt 4K?

A: This Teradek Bolt 6 RX 750 Monitor Module for Smart 7 Series is compatible with all Bolt 4K and 4K LT series 5 GHz transmitters

Q: 9. Would a 1500 RX paired with a 750 TX get better range than a 750 RX?

A: A Teradek Bolt 6 RX 1500 Monitor Module for Smart 7 Series (Gold Mount) paired with a Teradek Bolt 6 Monitor Module 750 TX for Smart 7 Series Monitors would not have a longer transmission distance than when paired with a Teradek Bolt 6 RX 750 Monitor Module for Smart 7 Series (Gold Mount) as the unit with the shorter range will determine the transmission distance; however you may have a more reliable signal due to the V and H antennas included with the 1500 model.

Q: 10. Will this work on a SmallHD 701?

A: The Teradek Bolt 6 RX 750 Monitor Module for Smart 7 Series (V-Mount) is only compatible with the following SmallHD display models Cine 7, 702 Touch, and Indie 7 Smart Monitors.

Major Audiophile	06/09/2024
I use the HeadAmp6PRO to listen to high end headphones, like AKG K-702, Beyerdynamic DT-990, and Sennheiser HD595. I also have a discrete class A headphone amp, but two of the above headphones need more bass, in my opinion. The bass/treble control is great - very low noise - can play the 702's very loud and they are not easy to power. Highly Recommended for this purpose, or Pro Audio. 5

Hiroyuki	05/08/2024
I purchased this headphone amplifier for my recording studio use. I used Personus HP60 and Behringer HA8000. Both supplied insufficient power to the headphones when musicians play their instruments. This ART amplifier drives Beyerdynamic DT-880-pro-250 well. Knob layouts are well thought and the amplifier can be tweaked without requiring too much attentions. The circuit diagram, which is printed on the top of the unit, gives a great help. 5

Hiroyuki	05/08/2024
I purchased this headphone amplifier for my recording studio use. I used Personus HP60 and Behringer HA8000. Both supplied insufficient power to the headphones when musicians play their instruments. This ART amplifier drives Beyerdynamic DT-880-pro-250 well. Knob layouts are well thought and the amplifier can be tweaked �without requiring too much attentions. The circuit diagram, which is printed on the top of the unit, gives a great help. 5

Shirk	06/06/2024
I bought this to replace an aging and worn out Behringer H4700. I hate Behringer products with a passion and would normally avoid anything they make, but the 4700 really did deliver. The sound was a bit brittle and the slight 60hz hum was annoying but it served me well for 5 years. When it finally died, I wanted something to replace it and the ART HeadAmpPro6 was the perfect solution. It has all the functionality of the Behringer, plus 2 additional headphone amps and better build quality...so it seems. At $, I was happy to pay a few more dollars for something non-Behringer. My only complaint would be that the aux inputs are on the back side. That means, I either need to wire those rear inputs to points on my patchbay, or crawl around back of the rack to plug in the the necessary patches. I also dislike the bright Blue LEDs on each channel, but that's a minor issue. 5