K&F Concept Professional Camera Tripod

K&f Concept X324c4 Multifunction Carbon Fiber Tripod

Product Code: ga72643
Availability: In Stock

$1,407.00 $1,744.68

Qty

5 reviews Write a review

Description
Reviews (5)

The X324C4 Multifunction Carbon Fiber Tripod & Monopod from K&F Concept can be used with or without the center column, and the center column can be removed and used as a short, handheld monopod with the included ball head. With the center column installed, the tripod reaches a maximum height of 70". If you remove it, the maximum height is 54" but you'll have a sturdier setup. When it's removed, a drop-in adapter is removed from it and used to support the ball head directly on the tripod. With the center column removed, you can also spread the tripod legs to near flat for ground-level shooting. Another feature is inverted shooting. This is done with the center column installed and the tripod legs inverted. The camera will hang upside-down, low to the ground. The maximum weight capacity in all modes is 44 lb. The folded length is 22".

The tripod legs feature non-slip rubber feet, which are removable to reveal spiked feet for use on soft ground. Two 3/8"-16 accessory threads are provided right above the legs for attaching monitors and other add-ons via articulating arms or other supports. A hook at the bottom of the center column allows you to attach sandbags or other weights. There are twist leg locks along the 4-section legs, the largest of which is 32mm in diameter. Flip locks at the top of the legs let you release the legs to adjust them into different angle positions. The ball head has a 35mm ball diameter and comes with a quick release plate with a 1/4"-20 screw. It also has a bubble level for balancing your shots. The tripod legs and center column are made of 10-layer carbon fiber.

Center Column Useful as Short Monopod 70" Maximum Height Near-Flat Ground-Level Low-Angle Spread 44 lb Weight Capacity Inverted Shooting Rubber and Spiked Feet Two 3/8"-16 Accessory Threads Weight Hook Twist Leg Locks Carry Case Included

Key Specs
Camera Mounting Screw	1x 1/4"-20 Male
Head Type	Ball Head
Primary Material	Carbon Fiber
Load Capacity	44 lb / 20 kg
Maximum Working Height	70" / 177.8 cm
Closed Length	24" / 61.0 cm
Camera Attachment
Camera Mounting Screw	1x 1/4"-20 Male
Head
Head Type	Ball Head
Legs
Primary Material	Carbon Fiber
Leg Lock	Twist Lock
Leg Sections	4
Independent Leg Spread	Yes
Foot Features	Spiked
General
Load Capacity	44 lb / 20 kg
Maximum Working Height	70" / 177.8 cm
Center Column	Yes, Round: Ballast Hook, Removable, Reversible
Max Height without Center Column	54" / 137.2 cm
Closed Length	24" / 61.0 cm
Bubble Level	Yes
Packaging Info
Package Weight	6.27 lb
Box Dimensions (LxWxH)	26 x 4.9 x 4.6"

Related Questions and Answers

Q: 1. what is the closed height?

A: The closed height on the SA284C1 is 19 inches.

Q: 2. what is weight with and without center column?

A: The K&F X324C4 weighs 4.7 lbs with the column installed. However, the manufacturer does not publish weight with the column removed.

Q: 3. Is the quick-release mechanism compatible with standard Arca Swiss style plates?

A: Regarding the K&F Concept BA225 Carbon Fiber Tripod with Ball Head, yes, the quick release mechanism is compatible with standard Arca-Swiss-style plates.

Q: 4. Monopod mode can be used as extension for gimbal?

A: Yes, if a end-user really need the extra height it could be used with a gimbal but we would suggest to use with out ball head and a bushing is needed in order to do so. Oben 3/8"-16 to 1/4"-20 Reducer Bushing BH #OB1039 • MFR #OB-1039 https://bhpho.to/43QIPGe https://bhpho.to/43QIPGe https://bhpho.to/43QIPGe

Q: 5. Anyone had any luck replacing the center column after use as a monopod? Can't get it reconnected for the life of me.

A: If you are having difficulties with the K&F Concept BA225 Carbon Fiber Tripod with Ball Head, you can contact the company at customer@kentfaith.com

Q: 6. Do the legs lay flat to the surface. I did not see a picture where they are splayed out or the tripod is on the ground?

A: The K&F Concept Professional Carbon Fiber Tripod with Monopod & Ball Head (70") has a minimum working height of 21.3 inches.

Q: 7. Which head will this tripod come with?

A: According to K&F, the BA225 tripod comes with the KF25 ballhead.

Q: 8. What is the thread size of the monopod for attaching other devices?

A: The monopod feature of the K&F Concept Professional CF Tripod is intended to be used with the included ballhead via a 3/8"-16 thread, and for your camera via 1/4"-20 thread of the ballhead/QR plate.

Q: 9. Made in Chine?

A: According to our records, the K&F Concept Professional Carbon Fiber Tripod with Monopod & Ball Head (70") is made in China. Please note that this information is subject to change at any time.

Q: 10. Does this tripod have a handle?

A: K&F Concept D225C2 Carbon Fiber Tripod with Arca-Type Ball Head and Monopod BH #KF09094V1 doesn't have a handle.

Henry	21/08/2024
I had been thinking about upgrading my tripod and when the K&F Carbon Fiber came up at a discount, I knew I should take a closer look. After I looked it over I decided to order it knowing that if I didn't like it I could return it, thanks to B&H generous policies. I made a good decision - it's a good solid unit and does everything I want - I can say that having only used it once before writing this review. The fact that it is made in China should not deter anyone from giving it a try. Smooth leg locks, carbon fiber construction, multiple ball head adjustments, pan adjustment, removable center column, and Arca-Swiss compatible. Yep, good stuff. I'm using a Canon DSLR with battery grip and my heaviest lens is my 100-400 EF L II. Very stable on this tripod. 5

Becky	19/07/2024
I love the tripod. Easy to use, easily adjusts, and very stable for a heavy camera. It was actually jammed when I received it, but loved it so much I opted for replacement parts instead of returning it. KentFaith was quick to send the parts as it was still under warranty but past the return deadline. B&H worked with me to get their information. 5

Richard	16/07/2024
This is a very sturdy tripod even with my Sony a99 and either Tamron 70-200 f2.8 or my Minolta 300mm f4. The Monopod is just a great and useful bonus. 5

Doug McKinniss	24/05/2024
Very impressed with the quality of construction. Lightweight and strong. Using a Sony 200-600 on I with a gimbal. Works very well. 5

Darin	16/04/2024
Incredible build quality, lightweight, great features. I love the ability to remove the center column to 1.) lower the weight, and 2.) allow your tripod to be lowered very close to the ground. The latter is of particular interest if you are like me, and love getting ultra-wide foreground in your shots. The second feature that is fantastic is the friction ring for the ball head. Ive had issues in the past with ball heads where when you loosen the knob, your lens causes the camera to just flop over. The friction ring on this ball head prevents that and its an awesome touch. For the money, you'd be hard pressed to find anything better. 5