The light beige Countryman E6 Directional Earset Mic, Low Gain with Detachable 2mm Cable and LEMO 4-Pin Connector for Vega Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a LEMO 4-pin connector for direct connection to Vega 77 and 677 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Vega Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Can this be used for the ZCam M4?

A: Unfortunately we can not say if the Camera Motion Research 36W 2-Pin LEMO to AC Adapter Cable (7') will work, as we can not verify if the polarity matches that of the input on the Z CAM E2-M4. I'd recommend using the GyroVu USB to Sony L-Series Dummy Battery Cable with Power Supply (40")(BH #GYGVUSBSLPS) instead. See: https://bhpho.to/30OkDpW

Q: 2. Does this work with BMPCC 6K Pro? Thanks.

A: The BMPCC 6K Pro has a 2-pin LEMO port and you will need this instead: Anton Bauer P-Tap to BMPCC 6K/4K 2-Pin LEMO Cable (20") https://www.bhphotovideo.com/c/product/1596766-REG/anton_bauer_8075_0309_p_tap_to_blackmagic_design.html

Q: 3. Can this cable be used to output audio from a Lectrosonics DCHR to a Arri Alexa demo ?

A: No. The PSC TA5F to 5-Pin LEMO Lectrosonics Timecode Jamming Cable is specifically for use with timecode. As a compatible option, you can use the Remote Audio TA5F to Mini 5-Pin LEMO Cable B&H # RECAT5FMLR5).

Q: 4. Does this transmitter work with SL MCR 2 DW-5?

A: No, the Sennheiser EW-DX TS 3-PIN Digital Wireless Tablestand Transmitter with 3-Pin XLR Connector only works with the EW-DX receivers.

Q: 5. I’m confused if this is the cable to jam sync a Tentacle with a Sound Devices 633, or is it the C02?

A: The two cables are directional so it depends on which device you are using to generate timecode and which is receiving timecode. You'll see an arrow on the white band near the 3.5mm connector that shows the direction of signal flow for each cable. The C03 is for sending timecode from the 633 into a Tentacle Sync and the C02 is for sending timecode from a Tentacle Sync into the 633.

Q: 6. what V-Mount battery operate this Vaga 30C????

A: The Z CAM ZOLAR Vega 30C RGBAW LED Light Panel has many options for batteries. It needs to use two V mount. Best not to use batteries that are less than 150wh. This is an example, https://bhpho.to/3LaBDfe

Q: 7. Will this cable work to jam to a Deity TC-1 box? Same thing, just the Deity?

A: Yes but it is recommended that you use the Deity Microphones C14 instead because of the threaded locking connector.

Q: 8. Does it come with a clamp to clamp the power supply to the stand?

A: There is no clamp for attaching the power supply to the light included with the ZOLAR Vega 30C RGBAW LED Light Panel.

Q: 9. Based on the direction of the tentacle, is this version a female 5-pin LEMO? I'm hoping to use to power my nucleus nano from my handle

A: The LEMO connection on this cable is is male, and it is designed for time code to be sent from a Tenacle Sync TC generator to a device with 5-Pin female TC in.

Q: 10. (Thank you for including the SSI rating.) How loud is the fan?

A: The following unit is silent in a production environment the following system produces dp levels between 30-50. which is considered silent in a production enviroment.