The tan Countryman E6 Directional Earset Mic, Low Gain with Detachable 1mm Cable and cH-Style 4-Pin Connector for Audio Technica Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a cH-style 4-pin connector for direct connection to Audio Technica ATW-T5201 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Audio Technica Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Would this microphone connect to the Zoom H1n? If so, how would it?

A: Technically you can, but it's kind of a long walk. You would need to connect the mic to a Phantom Power Supply, and then to the H1. You may want to consider a self-powered mic (one AA battery) and the correct cable: https://www.bhphotovideo.com/c/product/1171344-REG/senal_mc24_el_professional_shotgun_microphone.html https://www.bhphotovideo.com/c/product/1221867-REG/kopul_xrsm_015b_xrsm_3_pin_xlr_female.html

Q: 2. Can you verify that the cable length on this microphone is indeed 13.1' long? I purchased a few of these 3 or 4 years ago and the cable was shorter on those. I prefer the longer cable.

A: 13.1' (4m) cable permanently attached to mic, TA3F connector at power module

Q: 3. Are the ear pads just for show or are they monitor speakers/headphones?

A: This is not a headphone and you cannot monitor sound with it .The pads are there for comfort.

Q: 4. is this a condenser microphone?

A: Dynamic: "the PRO8 headset is a dynamic headset"

Q: 5. With the boom mic attached to the headphones with headphones attached to my Zoom H5, does that mean the Zoom will record me?

A: The RODE NTH-Mic Detachable Boom Microphone for NTH-100 Headphones BH #RONTHMIC is made for the RODE NTH-100 Professional Closed-Back Over-Ear Headphones (Black) BH #RONTH100.

Q: 6. Will the AT875R work on a Panasonic Lumix GH4? Does it plug directly in or do I need a pre amp?

A: The Audio-Technica AT875R Short Shotgun Microphone requires phantom power to operate, which is not provided directly from the 3.5mm external microphone input on the Panasonic Lumix GH4 Mirrorless Camera. To use these two components together, a device that provides a phantom-powered XLR input preamp and converts the signal to a 3.5mm microphone output is required. BH #BEDXAMICROP Beachtek DXA-MICRO-PRO Active XLR Compact Adapter is a good solution in this scenario: https://bhpho.to/3tzeD2N

Q: 7. attaching this to the Canon XA10 what cable do i need to purchase? Thanks!

A: If you are interested in mounting the 875R to the XA10, we recommend a short XLR cable. Kopul makes a variety of high quality cables. The 4000 is a premium cable and comes in coiled or straight.

Q: 8. What is the Optimal Pickup Range? looking to use it for interviews on set. I would have it over the talents head, out of frame

A: You should be able to place the Audio-Technica AT875R Short Shotgun Microphone about 3 to 5 feet overhead to capture clear audio, then adjust the distance to find the sweet spot, depending on how loud the people are speaking.

Q: 9. Does this transmitter work with SL MCR 2 DW-5?

A: No, the Sennheiser EW-DX TS 3-PIN Digital Wireless Tablestand Transmitter with 3-Pin XLR Connector only works with the EW-DX receivers.

Q: 10. can this mic be used with headphones for monitoring?

A: There is no headphone port on the mic. You would need to monitor the sound from the device you plug the mic into.