The light beige Countryman E6 Omnidirectional Earset Mic, Low Gain with Detachable 2mm Cable and LEMO 6-Pin Connector for Micron Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a LEMO 6-pin connector for direct connection to Micron TX 700-Series wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Micron Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Well this boom work in other dual port headphones? I.e. Fostex TRP50s?

A: The RODE NTH-Mic Detachable Boom Microphone for NTH-100 Headphones BH #RONTHMIC is only for the headphones listed.

Q: 2. Does this work with BMPCC 6K Pro? Thanks.

A: The BMPCC 6K Pro has a 2-pin LEMO port and you will need this instead: Anton Bauer P-Tap to BMPCC 6K/4K 2-Pin LEMO Cable (20") https://www.bhphotovideo.com/c/product/1596766-REG/anton_bauer_8075_0309_p_tap_to_blackmagic_design.html

Q: 3. Can I connect to the Rode Wireless GO II 2?

A: Since the BOYA BY-M2D Dual Omnidirectional Lavalier Microphones have a detachable Lightning cable with a standard 3.5mm TRS connector and operate using plug-in power, the BY-M2D should work with a standard 3.5mm TRS male to 3.5mm TRS male cable like the Pearstone Stereo Mini Male to Stereo Mini Male Cable (B&H # PEMMSA103B) to connect to other devices that have a standard 3.5mm TRS mic input and supply plug-in power. Although we have not tested it with the Wireless GO II transmitter, the BY-M2D should work when using the stereo mini aux cable.

Q: 4. Will this improve the SQ of a cell phone for recording live music? (Big concerts so stereo recording is not needed). Needs to be lapel style.

A: An external microphone will improve the audio over the built in mcrophone of the mobile phone.

Q: 5. Can I use this to power my Heden Carat resceiver from my Steadicam Zephyr camera stage?

A: Hi JB - we don't have compatibility information regarding use of our cables with non-redrock gear, sorry. I'd suggest checking with Heden on their power requirements, just make sure you know if they use arri standard or US standard polarity (they are opposite of the two) and use the appropriate cable.

Q: 6. Can I take of wind screen?

A: Yes

Q: 7. Does B&H sell the version with HDMI instead of sdi?

A: Yes we do. BH #ZAZHPVC is the Zacuto 4 Pin LEMO Compatible Power And Hdmi Video Cable. https://bhpho.to/2LeAXbf

Q: 8. Could I use this cable to sync timecode from my Atomos Shogun (that has a LEMO port) out to my Sound Devices MixPre-3 via the MixPre-3's Aux-in port? I have a Sony A7III that's generating the timecode out to the Shogun. So, essentially, this cable would connect to the Atomos Shogun's LEMO port and the Shogun would be sending the timecode out to the MixPre-3's 3.5mm AUX-IN. And if so, will recording be triggered from camera, to shogun, to the mixpre? I know the Sony will trigger the shogun, but can the shogun trigger the mixpre with the aforementioned setup? Thanks!

A: This cable is not appropriate for the Shogun and MixPre. To connect the Shogun to the MixPre, you would want to connect the HDMI output of the Shogun to the Micro-HDMI connection on the MixPre. This will take the HDMI TC from the Sony to the recorder. The MixPre must be set in HDMI TC Mode and will stop and start recording from the camera triggering it.

Q: 9. does this come with the lemo cable to d-tap as well?nothing is pictured, also, how long is the cable?Thanks.

A: Hello DaveNo! A d tap did not come with the cable. I bought the faux battery separately. I already had the cables. Hope this helps Best Justin

Q: 10. Based on the direction of the tentacle, is this version a female 5-pin LEMO? I'm hoping to use to power my nucleus nano from my handle

A: The LEMO connection on this cable is is male, and it is designed for time code to be sent from a Tenacle Sync TC generator to a device with 5-Pin female TC in.