The light beige Countryman E6 Omnidirectional Earset Mic, Low Gain with Detachable 2mm Cable and 3.5mm Locking Connector for Sennheiser Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a 3.5mm locking connector for direct connection to Sennheiser SK 2020-D wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Sennheiser Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. I'm wondering if I bend it to be used on the other ear if the microphone will break? It's currently set up for the left ear.

A: The boom on the Polsen ESM-1-35H Single-Sided Earset Microphone is flexible and adjustable, so it should not break if you bend it to curve for use on the right ear.

Q: 2. Is it good to connect sennheiser G4 RX to Sound Devices 633 Line input?

A: Yes it is.

Q: 3. Does this lav come in white?

A: The Tentacle Sync Omnidirectional Lavalier Microphone with Locking 3.5mm Connector is currently only offered in black color.

Q: 4. Is the pinout compatible for Sennheiser or Sony?

A: The Tentacle Sync Omnidirectional Lavalier Microphone with Locking 3.5mm Connector is compatible for use with Sennheiser wireless transmitters.

Q: 5. Can you buy additional mic clips for this microphone?

A: Yes, a lavalier tie clip such as BH #AUTCOLM25 would be suitable for the Tentacle Sync lavalier.

Q: 6. Is the ear frame flexible? (Can the circular part be shaped, or will it snap?)

A: Yes. The single-sided earclip on the Polsen ESM-1-TA4 easily conforms to your ear and holds the mic in place for active applications such as fitness, mobile journalism, house of worship, and more.

Q: 7. Will this improve the SQ of a cell phone for recording live music? (Big concerts so stereo recording is not needed). Needs to be lapel style.

A: An external microphone will improve the audio over the built in mcrophone of the mobile phone.

Q: 8. Can I connect to the Rode Wireless GO II 2?

A: Since the BOYA BY-M2D Dual Omnidirectional Lavalier Microphones have a detachable Lightning cable with a standard 3.5mm TRS connector and operate using plug-in power, the BY-M2D should work with a standard 3.5mm TRS male to 3.5mm TRS male cable like the Pearstone Stereo Mini Male to Stereo Mini Male Cable (B&H # PEMMSA103B) to connect to other devices that have a standard 3.5mm TRS mic input and supply plug-in power. Although we have not tested it with the Wireless GO II transmitter, the BY-M2D should work when using the stereo mini aux cable.

Q: 9. Has anyone compared the Polsen ESM-1-TA4 Single-Sided Earset Microphone for Shure Transmitters to the Pyle PMEMS10... do they sound similar, dramatically different, level about the same?

A: While we have not compared the Polsen ESM-1-TA4 Single-Sided Earset Microphone for Shure Transmitters directly against the Pyle Pro PMEMS10 Omni Earset Microphone for Shure Wireless Transmitters, based on specifications and user reviews, the Pyle appears to edge out the Polsen in overall quality. It has a wider frequency response and is more commonly used with many positive reviews.

Q: 10. Could this be used with a Rode VXLR+ 3.5mm TRS female to XLR male adapter with phantom power converter to use it as a wired mic?

A: Yes, the Polsen ESM-1-35H Single-Sided Earset Microphone for Sennheiser Transmitters (B&H # POESM135H) can be used with the RODE VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter (B&H # ROVXLRP) in order to connect it to a wired XLR microphone input. As another option, you could use the similar Polsen ESM-1-MN Single-Sided Earset Microphone for Recorders and Wireless Transmitters (B&H # POESM1MN) for connection to a standard 3.5mm TRS mic input with plug-in power. Either version of the earset mic can be used with the VXLR+ adapter for connection to an XLR mic input. The difference between the two models is that the version for Sennheiser transmitters has a locking 3.5mm connector and the version for recorders has a standard non-locking 3.5mm connector.