The light beige Countryman E6 Omnidirectional Earset Mic, Low Gain with Detachable 2mm Cable and 3.5mm Locking Connector for Sony Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a 3.5mm locking connector for direct connection to Sony ZTX-B01 and ZTX-B02RC wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Sony Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will it work with the Sony WRT 820a?

A: Yes, this mic will work with WRT 820a series transmitters.

Q: 2. Will this mic work with Sony ECM-AW4 wireless mic?

A: This mic will work with the SONY transmitter.

Q: 3. Will this microphone work with the Sony UTX-B03 Bodypack Transmitter?

A: This mic is compatible withe SONY UTX-B03 Bodypack Transmitter. It offers a compatible connector and wiring.

Q: 4. Does this come in beige?

A: No, the Sony ECM-V1BMP is only available in black. We do offer other lavalier microphones in beige finish for Sony UWP transmitters such as the Microphone Madness MM-PSM-L Omnidirectional Lavalier Microphone for Select Sony Systems (B&H # MIPSMLSFBE) and Countryman B3 Omni Lavalier Mic, Standard Sens, with 3.5mm Locking Connector for Sony Wireless Transmitters (B&H # COB3W4LSN).

Q: 5. I use the UWP-D11, it says it came with the V1BMP mic. But the description of this mic does not indicate if the jam screws on. The other Sony lave mic, EMC 44 BMP does say the input will screw on. A) is this the mic that came with my system? Or is the description incorrect? I would like to use the same mic. Thank you in advance.

A: The Sony ECM-V1BMP style mic WILL screw onto your mic transmitter unit. The Sony ECM-44-BMP will not screw onto to anything. . .you must attach the XLR connector of your choice yourself. Hope this helps. Dave/austin

Q: 6. If you had to do it again, would you still buy this over the cos-11d?

A: The Sony ECM-77 Miniature Omnidirectional Lavalier Microphone with Locking Sony 3.5mm Connector and Sanken COS-11D Lavalier Microphone are both high-quality, professional microphone choices. Selection between the two is mostly a matter of personal preference but can also be influenced by application, continuity, and compatibility.

Q: 7. Is there an extension cable for this microphone?

A: Extension cables are not available for the Sony ECM-44BMP as it is designed to plug straight into a wireless belt pack, and a relatively short cable would work best. For longer cable runs, consider the ECM-44B (B&H# SOECM44B) with a XLR connector. XLR cables can be run typically up-to 200' without without signal degradation.

Q: 8. Will this work with Bubblebee Industries Lav Concealer for Sony ECM-77?

A: The dimensions of the capsule ECM-77 are different than the ECM-V1BMP. Based on this, they seem incompatible.

Q: 9. Will this work with the sony UTX-B03 transmitter?

A: Yes this lavalier is wired for all Sony transmitters including the UTX-B03

Q: 10. Will this mic work with the Sony UTX transmitters? Looks like the same connection.

A: The Sony ECM V1BMP features a locking 3.5mm jack that is compatible with the UTX bodypack transmitters.