The tan Countryman E6 Omnidirectional Earset Mic, Low Gain with Detachable 1mm Cable and TA4F Connector for Anchor Audio Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a TA4F connector for direct connection to Anchor Audio WB-6000, WB-6400, and WB-8000 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Anchor Audio Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Are these all black ones version 4?

A: The Peak Design Anchor Connector 4-Pack are all black in color.

Q: 2. are these the Thinner Anchors or thicker?

A: These are gen4 anchors and have thicker cords.

Q: 3. Can you attach these anchors to Fujifilm cameras without using split rings?

A: The majority of Fujifilm X series bodies would require a set of split rings in order to use them with the Peak Design Anchor Connectors.

Q: 4. Does this microphone work as a replacement microphone with the older Fender Liberty Platinum 7500?

A: No, the Anchor Audio WH-8000 16-Channel UHF Wireless Handheld Microphone is not a compatible replacement microphone for Anchor (or Fender) Liberty Series systems. The WH-8000 is designed for use with Anchor's 8000 and F1+ Series speaker systems.

Q: 5. How do we distinguish between anchors version 3 and version 4?

A: Peak Design AL-4 Anchor Links has a thicker cord and the logo is only in one side compare to the V3 anchors.

Q: 6. Will this improve the SQ of a cell phone for recording live music? (Big concerts so stereo recording is not needed). Needs to be lapel style.

A: An external microphone will improve the audio over the built in mcrophone of the mobile phone.

Q: 7. Can this microphone work with the Fuji GFX50S camera? Quote from Fuji manual - "Sound can be recorded with external microphones that connect using jacks 3.5mm in diameter; microphones that require plug-in power can not be used. See the microphone manual for details." Does this microphone require plug-in power?

A: The Anchor Audio HBM-LINK is designed for use with an AnchorLink wireless transmitter and cannot connect directly to the camera's mic input because it requires plug-in power. As another option, you could use a wireless headset microphone system like the VocoPro Commander-FILM-HEADSET Camera-Mount UHF Wireless Headset Microphone System (B&H # VOCOMFILMHS1) or Galaxy Audio GT-S Trek Series - Battery-Powered, Compact Wireless Microphone System - Headset (B&H # GAGTSX). Please contact us by phone or through live chat on the website if you would like further assistance.

Q: 8. Version 4? The answer previously was of asking whether the black anchors are version 4. The answer was incomplete by Lawrence.

A: We apologize for the confusion. Yes, Peak Design Anchor Connector 4-Pack (Black) are version 4. The logo is only in one side of the anchors. The previous version have the logo in both sides.

Q: 9. What is the load capacity of one anchor?

A: They are strong enough to hold any pro camera/lens/accessory combo. Anchors each hold over 200lbs (90kg) and feature extreme abrasion-resistance.

Q: 10. Where can i purchase the oval-shaped camera / strap connectors so that these PD connectors can connect to my camera strap lugs? Thank you

A: If you are referring to split rings for your camera's eyelets, click the link below to view; https://www.bhphotovideo.com/c/search?Ntt=split%20rings&N=0&InitialSearch=yes&sts=ma