The DaLite Fast-Fold Velour Drapery Kit for Deluxe Frames is a great way to add a touch of professionalism to your presentation. The drapery system provides a neat and "finished" look to the screen. It is a 16 oz, fire retardant cotton velour drapery that attaches with snaps to Fast-Fold screens to enhance the image and assure that your audience's attention remains fixed where it should be.

Fire Retardant    Without Adjustable Skirt Bar    Without Poly Case    Gray

Fully pleated for finished professional look

Standard colors available include black, blue and pewter gray

Complete kit contains a valance bar, 14" valance drape, wing bars, 30" wide wing drapes and a 45" long skirt

Related Questions and Answers

Q: 1. does the filter tray rotate?

A: Yes, the filter holder rotates.

Q: 2. Is there any official document or patch that is offered with this backdrop to reflect the FR rating? I can not find anything.

A: The Liba Fabrics Flame Retardant Velour Background (Black, 10 x 15') BH #LI2110D15 meets NFPA 701 Certification.

Q: 3. Will this matte box fit onto the Sony E PZ 18-110mm lens? I use this lens on my Sony FS7. It has a 95mm filter diameter.

A: This matte box has 93mm diameter and is thus too small. This would be a great matte box. It is a clip on but convertible to 15mm rods later. It has a 95mm ring included. Bright Tangerine MISFIT ATOM 2-Stage Matte Box Kit with Three Clamp-On Rings B&H # BRB12301007K (B&H Kit)

Q: 4. How do you configure this tripod for 3.5 setup?

A: Hi Peter,I'll try to explain the way that I have done this. For this configuration, I use the X PROball head because it allows for the easiest adjustments. First, hold the tripod as if you have just removed it from the box with the head pointed in the upward position. At the top of each leg, located just below the silver head mounting plate, you will see a rectangular silver lever approximately 2 1/4 inches long. This lever is the leg lock release. At the bottom of this lever, you will see an inverted triangle (with the point facing down). While holding the tripod by the other two legs, place your thumb on the triangle , of the leg you are working on, and apply downward pressure. You should feel the lock release. While maintaining this pressure, rotate the leg upward until it is in a horizontal position. This is the maximum the tripod will allow the leg to move. Release the pressure from your thumb and the leg will lock in place horizontally. Repeat this process for the other two legs. Now all three legs should be horizontal and the central shaft should still be vertical. Next, locate the wing-nut by the red emblem just below the silver head mounting plate. Unlock this wing-nut by turning it open. Invert the tripod so that the head mounting plate is seated in your left hand. At the bottom of the central shaft , you will see a large red triangular shaped button. Press this button and maintain pressure as you slowly push the central shaft upward. Continue pushing until you hear the lock engage . Invert the tripod right-side up. Then rotate the head mounting plate to the left of the wing-nut and the central shaft will now lay on top of the opposing leg. Next, turn the wing-nut to the locked position. Attach the X PROball Head and rotate the camera mounting plate to the upward position. Attach camera and you are ready to take low level pictures. Reverse each step of this process to return the tripod to its original position. Hope this helps.

Q: 5. What adapter will I need for my sigma 18-35 mm lens?

A: You will need the following adapter ring with that Mattebox. https://www.bhphotovideo.com/c/product/544786-REG/Genus_GL_GAR72_GAR72_72mm_Adapter_Ring.html

Q: 6. Is this Matte Box light enough for a Gimbal?

A: Joe, the answer will really depend on the weight loading capacity on the Gimbal you are thinking of. The Gimbal manufacturer would have those details and then you can calculate the loading capacity of the rig that you want to place on that. You can budget for 350grams of weight for the matte box on the front of your lens.

Q: 7. "Will the posted version of the 10-17 accept screw in filters and if so what size?"

A: No, the Pentax HD DA Fisheye 10-17mm f/3.5-4.5 ED Lens does not allow for standard thread-on filters.

Q: 8. Can this matte box take side flags?

A: The GML Matte Box Lite can take the side flags, as you can easiily drill/punch a hole through the Rayshade sides to fix the spindles onto the side. However, it will make the matte box front heavy, and if you're looking for a lightweight clip-on solution, then the side flags are going to add more weight to your camera front end. If you're looking to mount the matte box on a heavier camcorder and lens, then it shouldn't be an issue, but if it's a Sony A7S type camera, then it may be better to go with a GWMC matte box solution, and use adaptor bar rods underneath to help support the matte box (and side flags).

Q: 9. Can this matte box hold 3mm thick filters?

A: Genustech 4 x 4 filter trays can hold any 4 x 4 filter. This comes with one 4 x 4 filter tray.

Q: 10. What's the widest focal length lens you can use with this matte box on a full frame sensor camera?

A: A safe opinion would be 24mm on a full frame. But it does depend and you might make it to 20mm.