The tan Countryman E6i Directional Earset Mic, Medium Gain with Detachable 2mm Cable and 3.5mm locking Connector for Olympus, Roland, Sony, Tascam, Yamaha, or Zoom Portable Recorders is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6i earset's cable terminates to a 3.5mm locking connector for direct connection to Olympus, Roland, Sony, Tascam, Yamaha, or Zoom DM-420, DM-520, DM-620, DS-2400, DS-40, DS-51, DS-61, DS-71, LS-10, LS-14, R05, R09HR, PCM-D50, PCM-M10, DR-05, DR-07mkII, DR-08, PR-10, Pocketrak C24, Pocketrak W24, H1, H2, and H2n portable recorders.

For Stage, Theater, and Broadcast TV    Fits Select 3.5mm Recorders    Headroom for Speaking and Vocals    Detachable 2mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Can the Polsen MVP-6 or MVP-3 mics be mounted on a boom pole?

A: Yes, the Polsen MVP-6 Directional Shotgun Microphone can be mounted on a boom pole.

Q: 2. Would this be compatible with a Sony HXR-NX80 camcorder?

A: Yes, the Polsen MVP-3 is compatible for use with the Sony HXR-NX80. The camera has a 3.5mm mic input that will supply plug-in power. The mic can also be connected to one of the camera's XLR inputs when used with an XLR adapter that converts phantom power to plug-in power such as the Rode VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter (B&H # ROVXLRP) or BOYA 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter (B&H # BO35CXLRPRO).

Q: 3. What size for the Zoom H4essential recorder?

A: The Bubblebee Industries The Windkiller SE Windscreen for Zoom, Tascam, and Sony Portable Recorders (Medium) would be the best fit for the Zoom H4essential 4-Track 32-Bit Float Portable Audio Recorder.

Q: 4. Should I buy the MVP 3 or the MVP 6 microphone?

A: The choice between the Polsen MVP-3 and MVP-6 is a matter of personal preference as well as what type of device the microphone will be connected to. Both models can be used with cameras, smartphones, and recorders, but the MVP-3 is a micro shotgun microphone that is 3.3" long with a frequency response range of 60 Hz to 20 kHz and handles loud sounds up to 105 dB and the MVP-6 is a short shotgun mic that is nearly twice the size and 6.3" long with a frequency response range of 40 Hz to 20 kHz and handles loud sounds up to 100 dB. Both mics are cardioid and require plug-in power to function.

Q: 5. On the last product photo it shows BOTH of the included cords have a 90 deg bend on both ends. But on all other photos, the 90 deg bend is only on one of the two ends. Which will I get if I order?

A: The Polsen MVP-3 comes with a TRS cable and a TRRS cable. Each cable has one side with a 90 degree bend and the other side is straight.

Q: 6. What do I need to connect this microphone to a windows PC (desktop)? Someone suggested "usb audio interface."

A: To connect the Polsen MVP-3 Micro Directional Shotgun Microphone for DSLR, Smartphones, and Portable Recorders to a computer, you would require an audio interface such as the Rode AI Micro (BH #ROAIMICRO).

Q: 7. What is the inner diameter and depth in cm?

A: The Bubblebee Industries The Windkiller SE Windscreen is designed to fit over the built-in stereo X/Y microphones on portable handheld recorders like the TASCAM DR-40x, Zoom H5 and H6 with the XYH-5 capsule, and Sony PCM-D100. The manufacturer has not provided dimensions, but we can use the dimensions of items like the the Zoom XYH-5 capsule and the Sony PCM-D100 to provide a better estimate of the size. The XYH-5 capsule measures 2.6 x 2.4 x 1.6" (65.5 x 62.2 x 41 mm). Additionally, the fourth photo on the item page shows the windscreen used with the Sony PCM-D100, which measures 6.2 x 2.8 x 1.3" (7.2 × 15.7 × 3.3 cm).

Q: 8. Is this compatible with the Tascam Portacapture X8?

A: Yes, the Windkiller SE Windscreen from Bubblebee Industries is compatible for use with the Tascam Portacapture X8 Multitrack Recorder.

Q: 9. What is the internal depth of the Windkiller SE Windscreen(LG) in cm? I'm planning to use it with a BP4025 mic(AT8172 attached)

A: The Bubblebee Industries The Windkiller SE Windscreen is not compatible for use with the Audio-Technica BP4025 X/Y Stereo Field Recording Microphone. The internal depth is only about 3.5". As a better option for the BP4025, you can use the K-Tek KR-50-70 Fur Windsock for Ball-Type Handheld Microphones (B&H # KTKR5070).

Q: 10. will this work with an Android phone with USB C port? If so, how exactly?

A: To use the Polsen MVP-3 Micro Directional Shotgun Microphone for DSLR, Smartphones, and Portable Recorders with a USB C Android device, connect the included 3.5mm TRRS cable to an adapter such as BH #SATC35HPJAW Samsung USB Type-C to 3.5mm Headphone Jack Adapter and then into the phone.