The tan Countryman E6 Omnidirectional Earset Mic, Standard Gain with Detachable 1mm Cable and 3.5mm Connector for Amplivox Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a 3.5mm connector for direct connection to Amplivox S-1600T and S-1690T wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Amplivox Transmitters    Headroom for General Speaking    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this work with the RodeLink Wireless Filmmaker Kit system?

A: Yes, the Saramonic SR-M1 can be used with RodeLink Wireless and Sennheiser transmitters.

Q: 2. Is this compatible with the Tascam DR-10L?

A: This is only design for a wireless microphone system, Your better of buying this instead link below. [Polsen OLM-10 Omnidirectional Lavalier Microphone] from B&H https://www.bhphotovideo.com/c/product/944398-REG/polsen__olm_10_omni_directional_lav.html?sts=pi&pim=Y

Q: 3. Is this cord compatible with a D500?

A: Yes

Q: 4. Does this work on Senheiser ew100 G2 and G3?

A: Yes, the Saramonic SR-M1 can be used with Sennheiser transmitters.

Q: 5. Will this work with a Rode go system?

A: This microphone is designed to connect directly to the lightning port of your iPhone or iOS device. It will also connect to the RODE Wireless GO transmitter. NOTE: Multi-Section, Multi-Use Cable: The cable is made of two sections: a first section with the lav mic at one end and a 3.5mm TRS female connector at the other, and a second section with a 3.5mm TRS male connector at one end and an MFi Certified Lightning connector at the other. This two-section cable facilitates multiple purpose. Use the first section of the cable to route the mic into iOS devices that still offer conventional 3.5mm jacks. Conversely, the second section can be used to connect either the lav mic or any audio device with a 3.5mm TRS output (including wireless receivers and media players) to your iPhone or iPad.

Q: 6. Is this compatible with Boya WM4 wireless system?

A: Yes this mic would work woth the Boya WM4

Q: 7. Does the windscreen come off?

A: Yes, the windscreen can be removed from the Saramonic SR-M1 Omnidirectional Lavalier Microphone Cable with 3.5mm TRS Connector (Black).

Q: 8. Is this compatible with the Tascam DR-10L, and will the plug lock to that recorder securely?

A: Yes, the Saramonic SR-UM10-M1 Omnidirectional Lavalier Microphone with Locking 3.5mm Plug is compatible for use with the Tascam DR-10L Micro Portable Audio Recorder. The mic has the same type of locking connector as the recorder so it will attach securely.

Q: 9. How does this mic compare to the DK3A one from Saramonic?

A: The DK3A is much higher quality (sounds better).

Q: 10. Does it interfere with the DJI Wireless Mic like the Rode Lavalier Go?

A: The Saramonic SR-M1 is compatible with the DJI Mic transmitter units.