The tan Countryman E6 Omnidirectional Earset Mic, Standard Gain with Detachable 1mm Cable and LEMO 6-Pin Connector for Micron Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a LEMO 6-pin connector for direct connection to Micron TX 700-Series wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Micron Transmitters    Headroom for General Speaking    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this work with the Tilta ronin rs2/3 base plate

A: Yes, the Tilta 2-Pin LEMO to 5.5/2.5mm DC Barrel Male Cable (15.74") can be used with the Tilta Battery Plate for Power Pass-Through Plate for DJI RS 2 (V-Mount) or the Tilta Battery Plate for Power Pass-Through Plate for DJI RS 2 (Gold Mount).

Q: 2. Will this work with Cinegears?

A: This product is for TRIGYN Gear with a 2 Pin Lemo Connection. If the Cinegears does not have 2 Pin Lemo it will not work.

Q: 3. This cable works with Black Magic Pocket Cinema Camera 4k?

A: We're afraid not. While the Pocket Cinema Camera 4K appears to have a LEMO connection, that is not the kind of connection it offers. IndiPRO Tools offers the proper D-Tap Cable for Blackmagic Pocket Cinema Camera 4K (16"), B&H # INDTBP4K. You will want this cable instead. https://bhpho.to/2FdkOil

Q: 4. Will this cable work to power the SmallHD Cine 5 screen when connected to a V-mount battery?

A: No, the Tilta 2-Pin LEMO to 5.5/2.5mm DC Barrel Male Cable (15.74") will not but the Tilta 2-Pin LEMO to 5.5/2.1mm DC Barrel Male Cable (21.75") will power the SmallHD Cine 5.

Q: 5. Will this work to go from the Blackmagic studio camera 4K to a gold mount battery dc?

A: No this will not. You will need a specific cable for powering the Blackmagic Studio Camera 4K from a gold mount battery. Please contact Black Magic Design for more information.

Q: 6. Could this be used with a Rode VXLR+ 3.5mm TRS female to XLR male adapter with phantom power converter to use it as a wired mic?

A: Yes, the Polsen ESM-1-35H Single-Sided Earset Microphone for Sennheiser Transmitters (B&H # POESM135H) can be used with the RODE VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter (B&H # ROVXLRP) in order to connect it to a wired XLR microphone input. As another option, you could use the similar Polsen ESM-1-MN Single-Sided Earset Microphone for Recorders and Wireless Transmitters (B&H # POESM1MN) for connection to a standard 3.5mm TRS mic input with plug-in power. Either version of the earset mic can be used with the VXLR+ adapter for connection to an XLR mic input. The difference between the two models is that the version for Sennheiser transmitters has a locking 3.5mm connector and the version for recorders has a standard non-locking 3.5mm connector.

Q: 7. Is it the same female lemo that is used to use to power Red Komodo? As I want to use the smallrig battery plate 12v output to power red komodo with this cable.

A: This is a male LEMO cable and will not fit into the RED Komodo male LEMO port.

Q: 8. Will this power a RED Komodo from a V-mount Battery?

A: No, the Tilta 2-Pin LEMO to 5.5/2.5mm DC Barrel Male Cable (15.74") is not compatible with the RED Komodo.

Q: 9. Will this work on the RONIN 4d camera unit?

A: The DigitalFoto Solution Limited D-Tap to Right-Angle 4-Pin LEMO Cable for DJI Ronin 4D Wireless Transmitter & Monitor (3.3') is designed to be used with the DJI Transmission Transmitter or the DJI High-Bright Remote Monitor. To power the DJI Ronin 4D 4-Axis Cinema Camera 6K via D-Tap, the DJI D-Tap to DC-In Power Cable (1.6'), BH #DJPTDIPC16, would be recommended.

Q: 10. This is isn't the same as a 2-pin power cable that the bmpcc4k uses is it?

A: It is not the connection used on the Pocket 4K/6K.