The MuxLab 4K HDMI/ST 2110 over IP Uncompressed Multimode Fiber Receiver supports up to a 4K30 4:4:4 8-bit uncompressed HDMI signal from up to 1312' from a corresponding 500774-TX-MM transmitter, sold separately. This max distance is supported when using optional duplex multimode OM4 fiber cabling with LC connectors, while single duplex multimode OM3 cabling allows a range of up to 984'.

Multipoint-to-multipoint configurations can also be set up by connecting to a 10G Ethernet network. The receiver features a 1G Ethernet switch port with PoE for connecting additional network devices, and has an RS-232 Phoenix connector for remote control of end-point devices. Up to hundreds of these receiver and optional transmitter units can be set up in a single workflow, depending on network bandwidth, to integrate basic 4K HDMI devices into broadcast environments for hybrid HDMI/IP workflows, enabling broadcasters to have a single IP infrastructure instead of two separate ones. The gateway receiver supports the SMPTE ST 2110 standard and REST API for third-party serial management.

Integrate 4K HDMI into HDMI/IP Workflows    4K30 4:4:4 8-Bit Uncompressed Extension    1312' Multimode OM4/LC Fiber Distance    Multipoint Transmission via 10G Networks    1G Ethernet Switch Port with PoE    RS-232 Connector    REST API Support    SMPTE ST 2110 Support

• Integrates 4K HDMI devices into broadcast environments for hybrid HDMI/IP workflows
• Extends a 4K30 HDMI 4:4:4 8-bit uncompressed signal up to 1312' with no latency in a point-to-point setup over duplex multimode OM4 fiber cabling with LC connectors (or up to 984' over single duplex multimode OM3 cabling)
• Multipoint-to-multipoint configurations supported via connection to a 10G Ethernet network
• 1G Ethernet switch port with PoE for connecting additional network devices
• RS-232 Phoenix connector
• Support for SMPTE ST 2110 standard
• REST API support for third-party serial control

Related Questions and Answers

Q: 1. Hello. Does this camera come with an SDI/BNC connection? I see one in the picture, but there is no mention in the specs IO.

A: Yes, the MuxLab HDMI/IP PTZ Camera with PoE & 30x Zoom does indeed include HDMI and 3G-SDI output.

Q: 2. Can I use 3 of these on camera end with a 2110ip 3X3G on mixer's end using a switch like the one you offer or any 10g switch?

A: Yes, multiple Blackmagic Design 2110 IP Mini BiDirect 12G Converters can be connected to a mixer via network switch, your video mixer would just have to support 2110 IP video input to ingest the signals.

Q: 3. Does this come with the power supply?

A: Yes, the MuxLab 5x1 HDMI Switcher with 4K Support comes with a 5V DC power adapter.

Q: 4. Is there a delay time from input to output?

A: According to Muxlab this product has a 1 to 2 Frame Latency. It is a very low latency unit.

Q: 5. can I take 1 out put to TV and the other to a sound bar ?

A: The MuxLab 1x2 UHD 4K HDMI Splitter (B&H # MU100500) may be used with both a television and a sound bar simultaneously.

Q: 6. Would this product work with NETGEAR's SMPTE 2110 Compatible M4350 Switches? I'm trying to convert a 1080 60p camera SDI signal

A: If the NETGEAR switches are compatible with SMPTE 2110, then the Blackmagic Design 2110 IP Mini BiDirect 12G Converter would work well, as it converts SDI to standard SMPTE-2110 IP signal. 10G Ethernet connections would be needed to connect to the device.

Q: 7. Can this product convert or decode srt, tcp, rtsp transmissions from other systems? Like the teradek bond backpack or a live u?

A: The Blackmagic Design 2110 IP Mini BiDirect 12G Converter is not able to convert or decode SRT, TCP, or RTSP transmissions. It is designed to be used in studio environments with SMPTE-2110 IP systems.

Q: 8. Can it output to 2 displays of different resolution? i.e. 4K + 1080p (downscaled)

A: This product will output the resolution you input in to it, up to UHD 4K. We are not aware of it being able to send out two different resolutions.

Q: 9. Can you connect this directly to BMD Studio Camera 4K Pro G2? The description only lists 6K Pro.

A: Currently, although you could connect it, the Blackmagic Design 2110 IP Converter 4x12G PWR cannot integrate directly with either the Blackmagic Design Studio Camera 4K Pro or the 6K Pro as the 2110 IP converter has not yet been integrated with these cameras.

Q: 10. Will this work with the original BMD Studio Camera 4k Pro (Non G2) using its 10g ethernet?

A: The Blackmagic Design 2110 IP Mini BiDirect 12G Converter is listed as supporting Supports all SD, HD, and UHD standards up to 2160p60.