Nightstick designed the red FDL-300R-K01 Tactical LED Fire Flashlight with Helmet Mount to meet NFPA 1971-8.6 (2013) fire equipment requirements and give firefighters a powerful and highly functional illumination and safety tool that is easy and intuitive to use in high-stress situations when putting light on the scene is critically important to operations. Outfitted with a powerful white Cree LED and a smooth, deep parabolic reflector, the flashlight outputs 180 lumens with a beam design that is optimized for a long throw. The light's momentary or constant-on activation is controlled by a simple and intuitive rear push button that is easy to find and use even in cold and wet conditions.

The aluminum mount will fit on either side of a firefighter's helmet or hard hat and allows 140° rotation so the light will clear face shields, goggles or other equipment. Weighing just 4.4 ounces with the two included CR123 lithium batteries, the light won't add excessive weight to your head and neck if you opt to wear it on your helmet and you won't run the risk of getting it caught on dangling wires or debris. The housing is made of lightweight and durable glass-filled nylon polymer to withstand high heat and abuse on the job. The housing is also sealed to an IPX7 rating, making it waterproof and submersible to 3.3' for up to 30 minutes so it (and you) can get drenched with a hose and keep working, and it is impact resistant to almost seven feet so it can handle daily use and abuse.

For Firefighters & First Responders    180 Lumens of White Light    Fire Helmet/Hard Hat Mount    Simple Rear Push-Button Switch    Momentary and Constant-On Activation    Heat-Resistant Nylon Polymer Housing    Waterproof and Impact Resistant    1" Handle Fits Many Helmet Mounts    Meets NFPA 1971-8.6 (2013) Requirements    Runs on Two Included CR123 Batteries

• Specifically designed for fire and emergency rescue personnel
• Single 180-lumen output
• Bright white Cree LED emitter is shock resistant to hold up to abuse
• Smooth and deep parabolic reflector produces a focused beam optimized for a long throw for search and rescue operations

• Type: Push button
• Location: Tailcap
• Momentary or constant-on activation
• Raised & textured rubber switch boot is easy to find by touch

• Meets NFPA 1971-8.6 (2013) requirements for fire protection gear
• Mount attaches to either side of fire helmet/hard hat
• 140&; rotation allows light to clear face mask, goggles. etc.
• 1.25" diameter head accepts 3rd party filters
• Compact and lightweight to make wearing on helmets comfortable without causing snag hazards
• Red glass-filled nylon polymer housing is heat and corrosion resistant, and maintains a consistent neutral temperature in cold and hot conditions
• 6061-T6 aluminum tail-cap with Type III hard anodized finish
• IPX7-rated waterproof and submersible to 3.3' for up to 30 minutes
• Impact resistant to 6.6'
• Impact and chemical resistant
• High-impact polycarbonate lens with scratch resistant coating
• Recessed grenade grip handle offers a positive and secure grip in wet conditions
• Removable pocket clip included
• Runs on two included CR123 lithium batteries
• Light 4.4-ounce weight with batteries

Related Questions and Answers

Q: 1. what comes in box with pelican 7600 3 color flashlight?

A: The flashlight, a charging cord, a spare battery holder, and the instructions are in the box.

Q: 2. Do the side screw slots allow for mounting the camera vertically on the tripod?

A: Yes, there are 1/4"-20 threads on the side brackets.

Q: 3. Does the red flashlight 3CEFLNVtake a STANDARD 9V battery?How much shipping/handling cost/?

A: The light takes a standard 9V battery.Add the item to the cart online to calculate shipping to your address.

Q: 4. are the rosettes ARRI?

A: Yes. The following are ARRI Rosette w/ M6 Threads.

Q: 5. Is this a 670 nanometer red light?

A: The LEDs emit visible red light but a particular frequency is not specified. So if you need something in the upper end of the near-infrared spectrum I would suggest looking for another light. This is a lower end light, consisting of two LEDs a rheostat and 9V battery connector in a non-weather resistant case.

Q: 6. What is the shade of red light? (Wavelength greater than 650nm is better and should be mentioned.)

A: The Explore Scientific Astro R-Lite Red Astronomy LED Flashlight is not in infrared flashlight which is why there are no specifications for the nanometer range. It is made to luminate without affecting night-adjusted vision so you can read star charts, find eyepieces and filters, and safely navigate around your telescope.

Q: 7. Will this cage still fit with the Red expansion module attached to the bottom of the camera?

A: Unfortunately, the RED DIGITAL CINEMA KOMODO Expander Module cannot be placed beneath the Tilta RED KOMODO Kit E.

Q: 8. What lens adapters does this actually work with? (It didn't work with my Metabones G or Wooden Camera PL)

A: You'd use the Tilta PL Mount Lens Adapter Support for RED Komodo (Tactical Gray) (B&H# TIAT08LAS) with the Tilta Canon RF Mount to PL Mount Adapter for RED KOMODO (B&H# TIARFPL) on the Tilta Full Camera Cage for RED KOMODO (Black) (B&H# TIAT08FCCB). The Tilta PL Mount Lens Adapter Support for RED Komodo (Tactical Gray) (B&H# TIAT08LAS) is not designed for use with other brands' adapters such as those from Metabones or Wooden Camera.

Q: 9. how to change batteries?

A: There is a cover on the bottom back side of the Nightstick NSP-1400B Dual-Light Flashlight (Black) BH #NINSP1400B.

Q: 10. How do you charge it with only the flash light and battery

A: The following unit comes with a rechargeable lithium-ion battery, a charging cradle.