The black NSP-4640B FORGE Helmet Light from Nightstick delivers 25, 180, or 360 lumens of white light and fits nearly any firefighter helmet, whether the brim is turned up or down. It is equipped with a rear-facing green safety light so fellow first responders can see you.

The FORGE comes with a 360° pivoting mount that doesn't interfere with goggles, face shields, or other gear. It places light exactly where it's needed. Its 6061-T6 aluminum housing is IPX7 waterproof, submersible to 3.3', and rated to withstand drops from 6.6'. Runtime on a fresh set of two non-rechargeable CR123A lithium batteries ranges from 4.5 hours on the maximum brightness level to 30 hours on the low setting.

25/180/360 Lumens    Rear-Facing Green Safety Light    360° Pivoting Mount    IPX7 Waterproof, Submersible to 3.3'    Meets NFPA-1971-8.6 (2018) Standard    Two CR123A Lithium Batteries

• Output: 25/180/360 Lumens
• Runtime: 4.5/6.5/30 hours
• Rear-facing green safety light

• Push-button switch, easily operated when wearing gloves
• Click to turn on, press and hold to cycle through settings

• 6061-T6 aluminum 
• 360° pivoting mount fits all fire helmets and hard hats
• IPX7-rated waterproof
• Meets NFPA-1971-8.6 (2018) standard
• Serialized for personal identification
• Runs on two CR123A batteries, included

Related Questions and Answers

Q: 1. Is it possible to extend the arms? Are there compatible aluminum extension arms?

A: The Glide Gear POV100 Helmet will not have extensions arms and Glide Gear currently do not make extensions for this rig.

Q: 2. Can I use it with an xplor600/ Neewer600ad? Is it sturdy ? Thanks

A: This stand has a rated capacity of 5 lb. The xplor600, with battery, weighs 5.9 lb. Personally, I would use a heavy duty light stand for the xplor600 (and still use sandbags). Like this one: https://a href= http://www.bhphotovideo.com/c/product/1274797-REG/impact_ls_96habi_9_5_heavy_duty_air.html target= _blank www.bhphotovideo.com/c/product/1274797-REG/impact_ls_96habi_9_5_heavy_duty_air.html/a

Q: 3. Minimum height of this light stand is given as 1.8' or .7 meters. 1.8' is approximately 27". 0.7 meters is approximately 27 or 28 inches. What is the correct minimum height for this light stand?

A: Its is 27.17". Thank you for pointing out the typo.

Q: 4. Can the helmet be adapted as a face capture rig?

A: Hi, no this product is made for POV capture with the camera mounted to the crossbar, facing forward and properly balanced with the weights on the back of the helmet. Thank you for shopping at B&H!

Q: 5. It's tough to tell from the product photos.. are the knobs metal or plastic? Thanks in advance!

A: This stand and knobs are metal.

Q: 6. Will this work with nightstick nsp-430

A: Unfortunately they don't have a clip for this flashlight

Q: 7. Would this be acceptable for a Apollo mega soft box to keep it close to the floor?

A: Mounting the Mega with an umbrella bracket on this stand would get you within 4 to 6 inches of the floor. For contact with the floor I would suggest the #7425, 7 foot stand. It has a large footprint for stability but reduces to a small height. Add weight to the base for stability if you want to use these stands at near their full extension.

Q: 8. What is the footprint of this stand?

A: BH #AVA630B has a footprint diameter of 3.15' / 96 cm.

Q: 9. Do you think this could handle a 4 pound set up, with camera and lens??

A: We're afraid not. This is rated to handle up to 3 pounds.

Q: 10. Can I put a speed light on this?

A: Absolutely but you would need a shoe mount bracket with a cold shoe to mount a hot shoe speed light to the stand.