A studio organization solution, the Adapt-A-Mount Storage Bracket for Elinchrom by Angler eliminates the clutter caused by reflectors and softboxes by allowing them to be mounted for storage on walls or shelves, under tables, or anywhere else you can find room. Installing the durable metal bracket with the included mounting hardware is simple, allowing you to keep Elinchrom-mount accessories nearby and handy, but safe and out of the way.

Store Reflectors and Open Softboxes    Reduce Clutter and Organize Accessories    Protects against Accidental Damage    Attach to Walls or Shelves    Sturdy Metal Construction    Mounting Hardware Included

If you set your reflectors on the floor when you're not using them or just sit them on your desk, Murphy's law practically guarantees that they're going to get dented or dinged. The WM-EL keeps your floor and desk clear and uncluttered. And since your accessories are mounted where you can see them, you won't waste time hunting through them to find the piece you need

When you unmount a large softbox and don't want to trip over it every time you need to come out from behind the camera, the WM-EL offers the perfect solution. You can mount it on the bracket and leave it open yet out of the way until you need it again

All it takes is a few included screws to mount the sturdy metal bracket on the wall, so your accessories are out in plain sight or tucked away under a shelf or table

Related Questions and Answers

Q: 1. will this transmitter work with Rotolight Neo 2 and or Neo 3 without additional receivers?

A: The Elinchrom EL-Skyport Transmitter Plus will work with the Rotolight Neo 2 and 3.

Q: 2. Is this compatible for Fuji XT2 with Elinchrom BR500?

A: This is a receiver unit for a flash or any monolight which does not have a built in radio trigger. To fire an Elinchrom BRX 500 from the Fuji X-T2, you would need the Elinchrom EL-Skyport Transmitter Plus B&H # ELSTP.

Q: 3. Is it compatible with ELC Pro HD 500/1000?

A: Yes its works with elc pro.

Q: 4. Can this be used to fire a Rotolight neo 2 from a Fuji XT2?

A: Dont know. I use with Elinchrome lighting.

Q: 5. Does the work with the new Canon EL-5 Flash with Hotshot?

A: Yes, the receiver will drive anything that has a standard hot shoe. End-users beware that the system is a manual driven unit and no TTL will be provided.

Q: 6. Does this receiver get triggered by the Transmitter PRO? I recently bought both and it not triggering. Note I updated both devices. I used the PRO on the Nikon d750 and the receiver plus on Nikon flash sb 700

A: Yes this receiver can be trigger by any current Elinchrom Skyport Transmitter, even the Pro model.

Q: 7. How does this attach to a light stand? Do I need a special attachment?

A: The Elinchrom EL-Skyport Receiver Plus has a 1/4 -20 female tripod socket on the bottom of the hot shoe on the receiver. If your light stand has a male 1/4 -20 screw on the top of the stud on the light stand, then it should work for your usage needs. If not, I would recommend the Impact Deluxe Umbrella Mount with Adjustable Shoe, B&H # IMDUBAS, for your usage needs. This would give you the advantage to be able to tilt the receiver (and any flash mounted on the receiver) up and down, and has both a hot shoe and a 1/4 -20 male thread as attachment options for the Elinchrom receiver.

Q: 8. Will this work with the old Elinchrom Quadra?

A: If you stay on channels 1, 3, and 7 you'll be fine. Those are the channels that are compatible with the older strobes such as yours.

Q: 9. If I attached a Canon 600 EXRT on a Elinchrom EL-Skyport Receiver Plus. Could I use the EXRT internal radio? And the Elinchrom EL-Skyport Receiver Plus would fire my Quadra's at the same time?

A: This receiver will fire the light its attached to. If your using a Skyport transmitter then you could fire both the Quadra and the receiver with the 600EXRT.

Q: 10. Can the new Skyport receiver able to adjust flash power of Canon EX 600RT flash, remotely from the transmitter ?

A: Unfortunately, it cannot. But that would be cool.