Vienna Symphonic Library Vienna Suite Pro is a collection of sixteen 64-bit audio-processing plug-ins for both Vienna Instruments and any DAW that supports AAX Native, Audio Units, VST, or VST3 plug-in formats. Developed with an emphasis on quick comprehension, intuitive operation, and musicality, the high-precision processors can be used in any setup—from stereo up to 12.2 surround formats—to deliver professional-quality sound, whether on individual tracks, on full mixes, or during final mastering.

The fully scalable, Retina-ready graphic interfaces (GUI) and real-time visual feedback are key to intuitively understanding how audio is being processed, from dynamics and filter processing in Compressor Pro, Limiter Pro, and Multiband Pro, to sonic analysis plug-ins such as Goniometer Pro and Loudness Pro. The suite also includes Hybrid Reverb Pro, which allows you to create the right ambience for your instruments.

Flexible routing and grouping options inside the most essential plug-ins make surround sound mixing and channel management effortless. In Analyzer Pro, Equalizer Pro and Compressor Pro, it's possible to process up to eight individual channels or groups separately in one plug-in. With Limiter Pro and Multiband Pro, several channels of a multichannel signal may be grouped for linked processing with up to eight possible groups.

The Suite offers hundreds of useful presets for Vienna Instruments as well as for full mixes.

16 Dynamics/EQ/Analyzer/Reverb Plug-Ins    Stereo and Surround Processing    Intuitive Routing and Grouping Options    AU/VST/VST3/AAX, Mac/Windows    Retina-Ready Scalable GUI    100s of Presets for Instruments & Mixes

• Analog constant Q-mode analyzer mode with 120 bands
• Digital FFT analyzer mode (12 display types)
• Loudest frequency note display
• Group settings—up to 8 groups can be processed and displayed individually or simultaneously

• Real-time input/output waveform display
• FAT and OPTO modes available
• Sidechain input selection from any available channel or host sidechain functionality
• Group settings—up to 8 groups can be processed and displayed individually or simultaneously

• Eight fully parametric EQ Bands (solo mode available)
• Available filter types—peak, high shelf, low shelf, high cut, low cut, notch, and band pass
• Integrated 120-band spectrum analyzer
• Keyboard with playable sine tone to locate frequencies
• 4x oversampling mode
• Adjustable reference pitch
• Group settings—up to 8 groups can be processed and displayed individually or simultaneously

• 4x oversampling processing to create higher order harmonics
• Unique distortion algorithms to completely eliminate aliasing
• Integrated FFT spectrum analyzer and difference graph

• Glow feature for goniometer and correlation meter facilitates controlling a mix without constant observation
• Integrated correlation meter to check mono compatibility, unwanted phase shifts, and polarity inversions
• Useable as a constantly visible controlling device for mixes due to extremely low CPU demand
• Oversampling allows for precise signal interpretation
• Allows analysis of any channel pair in a surround setup

• Combines surround convolution impulses with algorithmic reverb tails, providing the best of both worlds
• Graphic interface with intuitive parameter access
• Impulse response real-time envelope
• Variety of presets in the categories of room, chamber, church, hall, scoring
• Full 64-bit True Stereo 4-channel processing of impulse responses
• Includes impulse responses of five halls of the Vienna Konzerthaus, three ORF sound stages, and selected acoustic spaces by Inspired Acoustics and Numerical Sound
• Unique impulse-response decorrelation algorithm allows for rich, lush, and spacious atmospheres
• Advanced impulse-response manipulation
• Zero-latency processing
• Non-destructive envelopes for impulse-response volume, pan, decorrelation, high-pass, and low-pass
• High-quality impulse sample rate conversion
• High-quality impulse equalizer
• Reverse impulse response
• Pre-delay (0 to 500 ms)
• Time stretch (25 to 400%)
• Auto gain compensates for impulse volume
• Reads WAV, FLAC, and VCI formats
• Sample rates up to 96 kHz

• Improve or rebalance the spread between any input pair in a surround setup
• Input channel selection
• Visualization of channel positioning

• Real-time input/output waveform display
• Auto mode for transparent maximization
• True peak envelope detection (16x oversampled detector)
• Group settings—fine-grained control over the linking between audio channels with up to 8 groups

• Surround loudness metering (EBU R-128 standard)
• Real-time display of integrated, short term, momentary, and true-peak graphs

• Gain, delay, and phase network
• Source-destination matrix display with channel-feed settings

• 12-band surround dynamics processor
• Flexible graph editing and real-time visual feedback
• Group settings—fine-grain control over the linking between audio channels with up to 8 groups

• Stage positioning of signals
• Gain, phase, delay, and spectral balancing modes
• Real-time audio angular analysis

• Balance a mix in any surround environment

• Pan your source signal from mono/stereo to any surround format

Related Questions and Answers

Q: 1. Do they need a power source?

A: This Kit will include 2 Power Supplies for each speaker.

Q: 2. Did the Audio Tcnica Pro 24 CM work with an iPhone 5...?! What kind of accesories can i buy in b&h to make it work...?!

A: don't know

Q: 3. How many inputs/outputs does the program support? Or are you limited by the ethernet bandwidth only? Thanks!

A: You could literally have hundreds of sources input and controlled using Birddog Central Pro. You can have up to 5 Groups. By grouping BirdDog NDI Decoders you can instantly drive content to multiple screens. Gang up 10, 20, or even hundreds of receivers and push NDI content to your group with just three clicks.

Q: 4. will this mic work with my canon vixia HF R500?

A: Rico, it should work just fine, see page 84 of your manual. However, note that I do not see a hot-shoe mount on your canon model. Which means it would have to be attached to your camera somehow (rubberbands) or hand-held, which would not be optimal.

Q: 5. I have a Galaxy S9 Android phone. Is the connector in the TM-St1 removable so I could use the Rode SC7 3.5mm TRS to TRRS Patch Cable B&H # ROSC7? Or is there a TRS to TRRS adapter I could purchase?

A: The connecting cable is not removable.Use this adapter:Rode SC4 3.5mm TRS to TRRS Adaptor B&H # ROSC4

Q: 6. Is this compatible with a Panasonic HC-V750?

A: The basic answer is yes. This microphone is compatible with the 3.5mm audio input jack on that model according to the specs on this website. As for mounting, I cannot say. I've only mounted this mic on a stand.

Q: 7. I plug in wireless mics on the line in input, but nothing happens with the faders?

A: There's no reason why the line inputs should not work normally. Try isolating the problem. Make sure nothing is muted, all gain/volume controls are up, and you have a good signal coming into your mixer. Then check to see if all channel line inputs are inop or just that particular channel. If any or all line inputs do not work, do the xlr inputs work? Check to see if you have a signal from the insert. This is pre-fader, so if you do and there is still no output post fader then the problem is somewhere between your gain circuit and and output .

Q: 8. How far could the SR2 wireless speaker be placed from the sound bar?

A: Polk does nor specify but typically the range on these max out at around 50 - 65 feet.

Q: 9. I'm looking to add an RTSP IP Camera into a TriCaster TC1. Will this software provide the ability to do that?

A: Yes, Vizrt Connect Pro converts your IP cameras, webcams, capture card inputs and media files into NDI video sources for live production. With up to 4 discreet video channels that are configurable as an NDI input or output. Includes integrated standards conversion, professional color correction tools, 8-channel audio control, production utilities, and support for a range of capture devices. Also, RTMP, RTSP, and HTTP streams are supported.

Q: 10. Will ZaPrompt run on MACOS Catalina?

A: ZaPrompt states the following operating systems are supported: "Windows 7 or Higher - Mac 10.7 and higher." https://www.telmaxteleprompters.com/pages/download-zaprompt-pro