You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Nightstick Xpp-5422gm Intrinsically Safe Permissible Dual-light Flashlight With Clip & Tail Magnets (green)

Nightstick Xpp-5422gm Intrinsically Safe Permissible Dual-light Flashlight With Clip & Tail Magnets (green)
  • Product Code: ga73651
  • Availability: In Stock

$109.35 $133.41

Certified safe for use in hazardous environments, the green Nightstick XPP-5422GM Intrinsically Safe Permissible Dual-Light Flashlight offers spot, flood, and dual-beam functionality with a peak output of 240 lumens. Its engineered polymer body is IP67-rated waterproof and submersible to 3.3' and carries a 6.6' impact-resistance rating. The light is controlled by two push-button switches just below the head, one for the spot beam and one for the flood, and you have a choice of momentary or constant-on activation. Magnets in the tail and the belt/pocket clip give you placement options for hands-free use and are also useful for retrieving dropped metal objects.

Certified for Hazardous Environments    Peak Output 240 Lumens    Spot, Flood & Dual Beams    Dual Push-Button Body Switches    Momentary and Constant-On Activation    Lightweight Polymer Body    Impact & Chemical Resistant    IP67-Rated, Dustproof and Submersible    Clip and Tail Magnets    Runs on Three User-Supplied AA Batteries

General
Lumen Output1 Level in Spot Mode: 120 Lumens
1 Level in Flood Mode: 120 Lumens
1 Level in All-Beam Mode: 240 Lumens
Illumination Source1x White LED
Weapon MountableNo
Power
Estimated Runtime 17.5 Hours
Battery Type3x AA Alkaline
Physical
Material of ConstructionPlastic
Environmental ResistanceDust/Water-Resistant to 3.3' / 1 m (IP67)
Impact ResistanceDrop-Resistant to 6.6' / 2 m (Unrated)
Bezel Diameter1.8" / 4.6 cm
DimensionsH: 1.1 x W: 1.5 x L: 7.0" / H: 2.8 x W: 3.8 x L: 17.8 cm
Weight6.9 oz / 196 g
Packaging Info
Package Weight0.425 lb
Box Dimensions (LxWxH)9.15 x 6 x 2.05"

  • 120-lumen spot and downward-facing flood beams
  • 240-lumen dual beam
  • Cree LED and deep parabolic reflector for long throw
  • Runtime: Spot, flood 17.5 hours, dual beam 4.5 hours

  • Type: Push button
  • Location: Handle
  • Momentary and constant-on activation

  • cETLus, ATEX, IECEx, INMETRO, and MSHA listed Intrinsically Safe Permissible
  • Engineered polymer nylon housing is impact and chemical resistant
  • IP67-rated to be dust-proof and submersible to 3.3'
  • Impact resistant to 6.6'
  • Magnets in tail and belt/pocket clip provide many options for hands-free placement

Related Questions and Answers

Q: 1. Can I adjust the brightness from 15 to 178 lumen. Or it only supports 15 and 178 lumen?

A: This flashlight only has two settings: 15 lumens in low output and 178 lumens in high output.

Q: 2. How long is this cable?

A: 18 (45cm)

Q: 3. Is the cable that comes with the Super Shield? I need a replacement.

A: Yes, this is the short XLR cable that comes with the Rycote modular blimp kits.

Q: 4. How do you change the lumens level?

A: The tailcap push switch is used to toggle the level.

Q: 5. What is the color temperature ?

A: 5000 deg. K

Q: 6. Is this compatible with iPhone 11cameras?

A: Yes it is.

Q: 7. Can I use a 18650 battery?

A: Hi Joshua, No, as per Maglite.

Q: 8. How many lumens? 600 or 320?

A: This flashlight would give you 320 lumens at full output.

Q: 9. Does this pen have one light or two? The video shows two, one at the top of the clip, and one at the bottom of the clip. I bought one and it has only the bottom light?

A: The Olight OPEN Pro Rechargeable Pen/Flashlight with Green Laser has one laser and one LED.

Q: 10. How do you open the battery compartment?

A: Slide the battery cover off.

07/09/2024

I thought my flash light was a gonner after 5 years and the switch wore out. Then when I saw the tail cap was available I was very surprised so I ordered it and the light works like new. I had ordered another HP7R earlier because the lite has been so dependable, then when I saw the tail cap available I got it. So now I have 2 HP7R and my lighting needs are covered.

5
07/07/2024

I purchased my HP7R a few years ago from a police supply store. Recently my tailcap went bad and i went online to get a replacement tailcap. I ordered it and received a replacement. It came when they said it would and the tailcap was more than what I expected. I am happy with my purchase and recommend this flashlight.

5
04/07/2024

Great customer service. Got the correct parts.
Super satisfied!

5
24/06/2024

I own several Coast flashlights. Unfortunately, two of them quit working within weeks of each other. I contacted customer service and received a reply the next day. They sent me out a new tailcap and battery carriage. I tried each and tried another fresh set of batteries, and it still wouldn't work. I informed customer service and they sent out a new flashlight. For the other less expensive flashlight, they sent a new one without trying to send parts first. I was very impressed by their quick replies, status updates and making good on their lifetime warranty. Thank you for everyone's help!

5
05/04/2024

I emailed the company about my broken cap. Explained how long I’ve had the light and how often I use it. They didn’t even hesitate to offer a replacement cap at no charge.

5
05/04/2024

Such a simple fix to my flashlight. New tail cap has me back in business. Great customer service to suggest a replacement and the lifetime warranty is real!! Thanks Coast. I’ll be buying other products!

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Focal Sub One Active Dual 8" Subwoofer

$2,997.00 $4,105.89

Focal Sub One Active Dual 8" Subwoofer

$2,547.00 $3,412.98

Axis Communications Tp3901 Microphone Kit

$147.00 $196.98

Windtech Fur Fitted Microphone Windshield

$95.85 $119.81

Products You May Like

Ziv Dual Shoe C Bracket

$41.85 $56.50

Thule Landmark 60l Backpack (obsidian)

$719.85 $921.41

Fotostrap Cobalt Camera Strap

$344.85 $431.06

Dremel 3d Digilab 3d40 Flex 3d Printer

$3,750.00 $5,737.50