The ARRI Power Supply Light 24V from ARRI is a compact AC/DC adapter for powering an ARRI digital camera from an AC source. Designed for indoor use, this unit's attached 3-pin XLR cable connects to a separately available camera power cable. An AC wall cable must be obtained separately.

For All ARRI Digital Cameras    3-Pin XLR Connects to Camera Cable    280W, 24V, 11.7A Maximum Power    For Interior Use Only

Related Questions and Answers

Q: 1. According to the manufacturer site, this head is compatible with the DP1, DP2, and DP3 projectors. All those projectors come with and without lenses. What's the difference between the projectors? And what's the difference with and without the lenses? My goal is to project a gobo image onto a wall or person.

A: The DP3 https://bhpho.to/2vzDd4x would be the best choice for use with a 150w tungsten light. It has a fan built in to allow for long run times. The DP2 does not allow for Gobos or attachments. The DP1 would also work but does not have the cooling fan. The lens is what allows for focus and control of the light beam.

Q: 2. part number?

A: This is the AC adapter you need for the I-CUE Intelligent Mirror.Rosco PSU50 Power Supply - 50 WattsB&H # ROPSU50 MFR # 205714020050

Q: 3. Is there a version that works with 220 power?

A: You can use this version with 220v power https://bhpho.to/2LGyiZq.

Q: 4. Will this adapter also work to charge the Amaran t2c/t4c?

A: The Aputure INFINIBAR 24V Power Adapter Kit (48W) BH #APD0300A3A can be used with the BH #APB0241A3A.

Q: 5. Is this for 100-220volts? Or just only works with 110v?

A: While it is 110v-220v compatible, it only ships with a US plug. You will need a plug adapter to convert to your country specific outlet. Since it is 220v compatible you do not need a transformer.

Q: 6. What camera cable do I need to connect this to the Arri Alexa LF?

A: Power supplies are connected with a cable (for example KC-20 or KC-29) to the ALEXA LF BAT connector. We recommend using the ARRI Power Supply Light 24V (K2.0034493) or the Power Supply NG 12/26 R (K2.47351.0) to power the ALEXA LF. However, the Power Supply NG 12/26 R is not available for sale anymore, due to discontinued parts of the supplier. Please note, that the AMIRA and ALEXA Power Supply Light (K2.0006876) is not suitable to power the ALEXA LF. While it works fine in low power demanding situations, it may not work in high power demanding settings. Do not use this power supply with the ALEXA LF.

Q: 7. I have some devices in my rack that require 9vdc - how can I power that with this?

A: The SANUS CAPT01 MultiVolt Power Supply is not intended for use with devices that require 9V DC power. The CAPT01 features seven 12V DC power connections that are always on, four thermostat-controlled 12V DC connections, five 12V DC lights-only connections, and four 5V USB ports. A separate port is the input for the included thermostat.

Q: 8. Would this also work for a Panasonic Varicam?

A: Yes. The following unit will power both will power both varicam and Ursa units.

Q: 9. How long will the video light last while taking photos?

A: The Ikelite DS232 213Ws Underwater TTL Strobe with Video Light (US Power Supply) will last 1:15 minutes at full power. Half power for 4:45 minutes and 1/4 power for over 8 hours.

Q: 10. I'm curious, what is the purpose the bulb is not included?

A: Most tungsten fixtures such as this one do not include a bulb when the fixture is purchased on its own. The correct bulb to use for this fixture is Dedolight DL150 Lamp (150W/24V) B&H # DEDL150.