A simple optic with fixed magnification and fully anti-reflection multi-coated lenses, the Sightmark 4x32 Core TX Riflescope comes with a reticle calibrated for popular .223 and .308 ammunition. Exposed turrets adjust at 1/4 MOA per click and are lockable to help maintain a consistent zero, with 80 MOA of elevation and windage adjustment available in the 30mm maintube. The etched, red/green illuminated reticle offers five brightness settings to suit any ambient light condition.

The scope is made of 6061-T6 aluminum, nitrogen filled to prevent internal fogging, and IP67-rated waterproof and submersible. It comes ready to use with scope rings and flip-up lens covers.

Etched Illuminated Reticle, 2nd FP    30mm Diameter Maintube    1/4 MOA Impact Point Correction    80 MOA Windage & Elevation Adjustment    Exposed, Finger-Operated Locking Turrets    Anodized 6061-T6 Aluminum Housing    Full Multi-Coated Lenses    IP67-Rated Waterproof & Fogproof

• 4x magnification
• Fully multi-coated optics
• 32mm objective lens
• 25.2' field of view at 100 yards
• 4" eye relief

• Second focal plane
• Etched on glass
• Red or green illumination
• Five brightness levels
• Designed for use with .223 or .308 ammo
• Crosshair design with holds from 300 to 700 yards
• Powered by one CR2032 battery

• 1/4 MOA impact point correction
• 80 MOA elevation and windage adjustment ranges
• Exposed locking turrets

• 6061-T6 aluminum housing
• IP67-rated waterproof and dustproof
• Nitrogen purged for fog-free performance
• 30mm maintube
• Black anti-glare finish
• Parallax-free at 100 yards

Related Questions and Answers

Q: 1. Can this be used with hard drive without additional modules?

A: That depends on the type of hard drive. The Atech Flash Technology Blackjet TX-2DS Dual-Bay Thunderbolt 3 Cinema Dock can intake 2.5" SSDs via the included adapter, M.2 PCIe SSDs via insertion into the enclosure, and SSDmini via the Master Caddy 2.

Q: 2. Is this unit, via the Blackjet DX-1CXQ: CFexpress B/ XQD Reader, compatible with the Prograde Cobalt type B cards...ie Nikon Z9?

A: Yes, the Atech Flash Technology Blackjet TX-2DS Dual-Bay Thunderbolt 3 Cinema Dock with the Atech Flash Technology BLACKJET DX-1CXQ CFexpress B/Sony XQD Card Reader Module for TX-4DS Cinema Dock can read cards like the ProGrade Digital 165GB CFexpress 2.0 Type B Cobalt Memory Card used on the Nikon Z9 Mirrorless Camera.

Q: 3. Can two Blackjet TX-2DS units be daisy chained and used as a combo with Hedge software for reading and writing data?

A: Yes, The Atech Flash Technology Blackjet TX-2DS dual-Bay Thunderbolt 3 cinema dock software and hardware support Daisy chaining. The second Thunderbolt 3 port supports Daisy Chaining of additional Thunderbolt devices, a 5K display, or one USB device.

Q: 4. what extra is needed to mount two 2.5 inch ssd's?

A: To mount SSD's in the Atech Flash Technology Blackjet TX-2DS Dual-Bay Thunderbolt 3 Cinema Dock you need two of these: BLACKJET DX-1M M.2 NVMe SSD Enclosure for TX-4DS Cinema Dock BH #BLDX1M • MFR #BJ-0122-DX2

Q: 5. Will the light meter fit into it's case with this grip on it?

A: Yes, the Sekonic L-308X-U Flashmate Light Meter will fit into its leather pouch, when the Sekonic Grip for L-308 Series Light Meters (Red) is attached to the light meter.

Q: 6. How large is the footprint diameter?

A: According to the specifications for this stand, the footprint diameter is 42.9 inches.

Q: 7. Does each light use (6) AA batteries or only 2?

A: Each light would take 6 batteries

Q: 8. Can I bring an upstream recording via a Blackmagic Atem Mini Extreme ISO and then access the recording on a downstream Apple Mac Studio that is also connected to this dock?

A: The Atech Flash Technology Blackjet TX-2DS Dual-Bay Thunderbolt 3 Cinema Dock (B&H# ATTX2DS) works as a dual bay product that can accept a variety of memory card readers or drive enclosures to use the actual media (such as the included BLACKJET DX-1M M.2 NVMe SSD Enclosure for TX-4DS Cinema Dock (B&H# BLDX1M)). It connects by Thunderbolt USB C, each module being in one of the product's two bays, and then those work like any typical external drive. The Blackmagic Design ATEM Mini Extreme ISO (B&H# BLATEMMEI) will record to an external drive connected by USB C and thus could be used with the aformentioned ATEM.

Q: 9. hey, the overview says that the light is twice as bright when plugged into AC power. Does that mean it gets the equivalent power of a 300w light when plugged into AC or does that mean that the light normally runs at a 75w when battery powered with a max of 150w when plugged into AC? Thanks!

A: The 150w equivalent is when it is plugged in to AC.On batteries it is like it is the equivalent of a 75w light.

Q: 10. Will this fit the L-308X-U ?

A: Yes, it is compatible with the 308X-U.