Designed to fit their 1060, 1170, 1180, and 1260 series LED flashlights, the Nightstick Heavy Duty Magnetic Base enables you to attach your light to any metal surface, either horizontally or vertically. The magnet's surface is padded to protect the finish of whatever surface you stick it to such as car fenders, counters, and access doors. It can also be used as a weighted base to hold the light upright when placed on any reasonably-level non-magnetic surface.

Protective Magnet Padding    Use as a Weighted Stand    Can Support a Light Mounted Horizontally

Related Questions and Answers

Q: 1. Is it possible to just buy the storage bag?

A: While we do not sell the Tripod Case from Proaim, we do have a Ruggard Deluxe Padded 35" Tripod Case (Black), BH #RUBD3035. https://bhpho.to/3q6Gx1o

Q: 2. Can the male pin be removed and replaced with a baby pin? Strobes with modifiers tend to rotate down when not affixed to a pin with notches for the screw to snug into.

A: It is a baby pin. It is not removable.

Q: 3. What's the simplest, shortest way to adapt this to a 1/4" threaded male screw in order to mount smaller LED lights, without adding excessive length?

A: The smallest adapter to a 1/4 20 would be a Rapid adapter. https://bhpho.to/2lAkR1d

Q: 4. Please can you tell me the weight of this unit.

A: Approximately 24oz or a 1-1/2 lbs.

Q: 5. is the minimum height with the spreader open or closed?

A: The Proaim Heavy-Duty Mitchell Base Tripod Legs with Mid-Level & Ground Spreaders (Silver) has a minimum height of 2.9 feet when open and a closed height of 3.2 feet.

Q: 6. Do you know if it is compatible with the Rode PSA1 arm?

A: The RODE PS1 and PS1+ both have a 1/2 inch spindle and should fit, I have ordered this mount for my Rode PS1+

Q: 7. What is the diameter of the hole?

A: Looks like about 1/2 inch, it's the size needed for the OC White arms. It does have a winged screw that goes through the side of the holder and holds the arm's pin in place so it doesn't turn. if you want it to stay in place.

Q: 8. With one leg section, what is the footprint measurement?

A: Here are the measurements of P-MTCL-STD: Folded: 100cm Maximum: 175cm

Q: 9. Can the mid-level spreaders be removed?

A: Yes.

Q: 10. Will this take a Vinten 70 Head?

A: This tripod has a Mitchell mount. The Vinten Vector 70 head has the Four-bolt flat Vinten mount. You will need this adapter to use that head with these legs: B&H# VI31033 (https://www.bhphotovideo.com/c/product/97041-REG/Vinten_3103_3_3103_3_Mitchell_4_Bolt_Flat.html/specs)