The white ETC Source Four jr 26° Fixture supports tungsten bulbs up to 575W, runs on 115 VAC, and features bare ends so you can attach your own power plug. Small in size, the Source Four jr is well suited for both large and small venues, and when lamped with a 575W HPL bulb, it compares favorably with larger ellipsoidal lights from other manufacturers. It can accept different bulbs, supporting a maximum of 575W, and it comes with an interchangeable 26° lens tube, and projects a beam with a beam edge adjustable from soft to hard. The fixture features die-cast aluminum construction and has a steel yoke with two mounting positions. The Source Four is well known for its sharp optics and ease of use, and this fixture continues that tradition.

It features antireflection coated optical quality glass and a borosilicate reflector with a dichroic coating that helps it remove 90% of the heat while reflecting more than 95% of the visible light. Anti-vibration shockmounts are used to secure the reflector and lens tube. The fixture features two accessory slots and a slot for either glass or stainless-steel gobos (patterns). It also features a wide accessory slot suitable for use with motorized pattern devices or an optional iris. It accepts a 6.25" gel frame and has insulated control knobs and a rear handle. You can center your bulb for best results without tools, and once set, changing the bulb does not require re-centering.

Interchangeable Lens Tubes    Beam Edge Adjustable Soft to Hard    Die-Cast Aluminum Construction    Rotating Shutter Assembly    Slot for Glass or Stainless Steel Gobos    Accepts 6.25" Gel Frame    Insulated Control Knobs and Rear Handle    Tool-Free Lamp Centering Adjusting

• Optimized optical system for improved photometric performance and field uniformity allows for saturated colors and long throws
• Projector-quality, dual aspheric lenses
• Superior quality optical glass with advanced AR coatings
• Provides crisp edge definition and high gobo contrast
• Faceted borosilicate reflector with dichroic cold mirror coating removes more than 90% infrared radiation (heat) and reflects greater than 95% of visible light for an extremely efficient fixture
• Reflector secured with anti-vibration shockmounts
• Lenses secured with anti-vibration shockmounts
• Tool-free, positive locking X, Y and Z lamp centering adjustments, unaffected by re-lamping
• Beam edge continually adjustable from hard to soft
• Interchangeable lens barrels permit selection of 26, 36, 50°, as well as 25 to 50° zoom range lens tubes

Related Questions and Answers

Q: 1. there is no interior dimensions listed for this case. Will this fit my Eve 100's?

A: The ProX Road Case for up to 4 ETC Source Four Par and Ellipsoidal Fixtures (Black) BH #PRSSRC4X4W will hold EVE E-100Z lights.

Q: 2. Is the bare ends cable for the XT26 power supply 4-wire or 3-wire like the 60 amp bates version?

A: According to the manufacturer, the bare ends cable on the Aputure Electro Storm XT26 Bi-Color LED Monolight (Bare Ends Cable, Flight Case Kit) is a 3-wire cable.

Q: 3. how many watts

A: 400w equivalent

Q: 4. How is this light typically powered? If it is not suitable for US household power, what are the requirements to power the light?

A: The Aputure Electro Storm XT26 Bi-Color LED Monolight (Bates Connector) is powered via Bates connector. It would require a 30A circuit to work in the United States and this would need to be tied into your home by an electrician to function properly. This is not recommended for consumer use or in US households. This is a pro level light that requires 30 amp circuit to run properly.

Q: 5. Will a regular C Stand be able to hold it?

A: Yes, if payload properly but we highly suggest using a hollywood style type stand for extra security. Such as the following Manfrotto 126BSU Heavy Duty Steel Cine Stand, Black - 11' (3.3m) BH #MA126BSU • MFR #126BSU https://bhpho.to/3WDEpzz

Q: 6. What is the minimum and maximum wattage consumption of the Arri SkyPanel S60-C LED Softlight?

A: The maximum wattage consumption of the S60-C is 400 Watts.

Q: 7. What's the SSI rating, at tungsten 3200K and at Daylight 5600K?

A: I am sorry Arri does not publish the SSI of the s60C LED.

Q: 8. It says that it can be powered by an external battery - is there a specific type of battery compatible with it, else can someone recommend me one they've used successfully with it?

A: You will need the battery plate either Anton Bauer or V mount and then 2x batteries of at least 10amp draw each.

Q: 9. Is this a brand new S60, or is this refurbished?

A: This item would be brand new in the box.

Q: 10. Can I use 5 feet away from subject for interviews or is the fan too loud?

A: There is some noise, and at 5 ft. away the sound recordist may complain on an interior (minimal), but definitely not on an exterior. I've never had anyone complain.