The black On-Stage GS8730BK Wood Locking Guitar Hanger is designed to safely store an electric/acoustic guitar or bass on a wall, keeping your instrument ready for action, so you can play at the very moment inspiration strikes.

The GS8730BK's yolk features a weight-sensing mechanism that automatically locks when you hang your instrument by its headstock, providing a secure hold. The EVA padding supplies ample protection against nicks and scratches for even the most delicate instruments. To unlock your instrument, simply lift it up and away.

With its elegant black wood grain finish the GS8730BK complements your instrument, space, or decor. To simplify installation, a versatile mounting kit and easy-to-read instructions for connecting to studs (recommended) or sheetrock (via drywall anchors) are included.

Use several GS8730BK guitar hangers to keep your entire collection of fretted instruments quickly accessible in your creative space or to proudly display your prized possessions, safely high above the floor and away from accident-prone foot traffic.

Holds One Guitar on Wall    EVA-Padded Yolk    Weight-Sensing Automatic Lock    16.5 lb Weight Capacity

Related Questions and Answers

Q: 1. Can you mount two of these vertically, one on each end, and then use them to hold C-Stands?

A: Unfortunately, this bracket cannot hold the heavier weight of a C-stand.

Q: 2. Is this item compatible with Voyager & EVO carts?

A: This was designed specifically for the Ranger and Echo carts.

Q: 3. Will this hold the weight of an Audio Technica 2500 microphone?

A: I mount GoPro cameras to one of these and use it in an airplane and it never budges, so I would think that it would hold a 13oz microphone with no problem.

Q: 4. Can you run a cable thru it?i.e. assume I have custom mounts both ends that allow a cable to pass thru - I like to run cables out of site.Thank you.

A: You should be able to run a cable through it as long as it doesn't have connectors on the ends.

Q: 5. will these work with Matthews combo stands? they tend to need a wider slot.

A: Yes, as long as the stands feature a 5/8 receiver or a junior pin the stand will adapt. Please review the following item Impact CA-106 Junior to Baby Pin Adapter BH #IMCA106 • MFR #CA-106 https://www.bhphotovideo.com/c/product/824421-REG/impact_ca_106_junior_pin_to_baby.html?sts=pi

Q: 6. Will this work with Kupo master combo HD stands?

A: The Kupo Hanger for Heavy-Duty Stands (46.5") is not made to hold Kupo master combo HD stands.

Q: 7. what are the dimensions and thread sizes?

A: It is 19 long. Thread size is what is considered microphone standard: 3/8 .

Q: 8. The screw hole look inaccessible. how much clearance is there?

A: It's a tight space but if you have a small screwdriver you should not have any issues. Otherwise, putting the screw at an angle would be the way to go.

Q: 9. Can you remove the platform from the stand? If so, what mount does the platform have on it?

A: Yes, the platform can be removed from the stand. There are four screws that hold it in place. If you look at the third photo, you can see how they are attached. The piece that the platform rests on is flat and squared, but the manufacturer has not provided any dimensions for this piece. If you do need more information you can contact On-Stage by phone at 800-289-8889 or by using the contact form on their website. Here is a link: https://on-stage.com/content/contact/enduser

Q: 10. Will a Rode PSM1 shock mount go on to this? Do I need any adapters to be able to connect the two?

A: You wouldn't need any adapters, but a gooseneck like this will likely sag under the combined weight of the shockmount and microphone.A broadcast arm or a boom stand will be a better choice.