Looking to sync your equipment? Check out the Camvate Right-Angle BNC to Right-Angle 3.5 mm Mini Jack Timecode Cable, which is used to feed or accept a timecode signal between Tentacle Sync timecode generator and a device with a BNC TC in/out port. The cable features a right-angle, 3.5mm Neutrik mini-TRS jack connector and a right-angle standard BNC connector.

For C300/500, f55, Amira, Zoom F8    Right-Angle BNC    Right-Angle 3.5 mm    18" in Length

• Right-angle 3.5mm mini-TRS jack
• Standard right-angle BNC connector
• 18" lenght
• For C300/500 f55/ Amira / zoom F8

Related Questions and Answers

Q: 1. Will this work with a Panasonic AU-EVA? With its BNC timecode in from a Tentacle Sync E Mk II, specifically.

A: Yes, the Tentacle Sync Tentacle to BNC Cable can be used to send timecode signal into the Panasonic AU-EVA1 Cinema Camera's BNC timecode input connection from a Tentacle Sync E.

Q: 2. Can I use my zoom f8 as master and use this cable to jam sync timecode into the TC-1?

A: Yes, the Deity TC-1 can be jammed with the C15 Right-Angle Locking 3.5mm TRS to Right-Angle BNC Timecode Cable.

Q: 3. Will this work with the time code output at the canon c70? thanks

A: Yes, the Tentacle Sync Tentacle to BNC Cable is a bidirectional cable that can be used to take timecode out of or into the Canon EOS C70 Cinema Camera's timecode connection.

Q: 4. Will this work with a different brand of TC Generator like Ultrasync One?

A: yes no problem it will work with any brand equipment that requires that specific connection.

Q: 5. Would this cable work on a panasonic HPX 170?

A: The Tentacle Sync Tentacle to BNC Cable (Right Angle, 16") can be used with the panasonic HPX 170, which features a BNC output connector.

Q: 6. Is this cable bidirectional? Can it be used to send timecode OUT from TC1 to Ext, as well as Timecode IN from Ext to TC1?

A: The Deity Microphones TC-1 Wireless Timecode Generator Box cannot send and receive timecode at the same time via the Deity Microphones C15 Right-Angle Locking 3.5mm TRS to Right-Angle BNC Timecode Cable.

Q: 7. Will this cable work for zoom f6 timecode with track e?

A: Yes, the Tentacle Sync Tentacle to DSLR 3.5mm Mini-Jack Cable could be used to send timecode signal between the Tentacle Sync TRACK E and the Zoom F6 Multitrack Field Recorder.

Q: 8. Can this be used to transmit timecode from the Denecke JB-1 to the Lectrosonics MTCR?

A: Yes, you can use the Kondor Blue BNC to 5-Pin LEMO-Type Right-Angle Timecode Cable to sync timecode from the Denecke JB-1 to the Lectrosonics MTCR.

Q: 9. Does this cable fit in the plastic bracket provided with a Tentacle Sync mkii?

A: The Kondor Blue BNC to 3.5mm Right-Angle Timecode Cable for Broadcast Cameras (10") does not fit the plastic bracket provided with a Tentacle Sync mkii.

Q: 10. Can I use this to jam the blackmagic video assist 5 inch 12g?

A: No, the Deity Microphones C15 Right-Angle Locking 3.5mm TRS to Right-Angle BNC Timecode Cable is intended for use with the Deity Microphones TC-1 Wireless Timecode Generator Box (B&H # DEDTT0272D80) which uses a locking 3.5mm connector. The BNC connector would be for connection to the timecode input on the device that you are connecting to. The Blackmagic Design Video Assist 5" 12G-SDI/HDMI HDR Recording Monitor has a non-locking 3.5mm audio input, so if you are jamming timecode to the audio input you need a cable that has a non-locking 3.5mm TRS connector. If you are feeding timecode from a device with BNC timecode output, you can use the Tentacle Sync Tentacle to BNC Cable - Right-Angle, 16" (B&H # TEC08) or the Tentacle Sync Tentacle to BNC Cable - Straight, 16" (B&H # TEC06).