The Cre8audio NiftyCASE is a portable powered 84 HP Eurorack case with MIDI to CV conversion capabilities. The unit's flying busboard can power up to 10 modules, providing industry-standard power with over 1500mA of +12V, 500mA of -12V, and 500mA of +5V.

The case can convert MIDI inputs to CV, gate, modulation, and clock information, allowing you to integrate your modular rig into your DAW/MIDI system. The top of the unit features both USB and DIN MIDI inputs, with the converted signals showing up on standard 3.5mm outputs located on the front of the rack. The CV 1 and Gate 1 outputs respond to MIDI channel 1, while CV 2 and Gate 2 respond to MIDI channel 2. If you play a chord on MIDI channel 3, the lowest note is sent to CV 1 and Gate 1, while the highest note is sent to CV 2 and Gate 2 (single notes are sent to both outputs simultaneously). Modulation information sent from your MIDI keyboard is converted and sent to the Mod output. MIDI clock information sent to the NiftyCASE is converted to 1/8 note triggers on the Clock output.

The NiftyCASE offers two 3.5mm audio inputs on the front panel which are summed to the 1/4" output on top. The top of the unit also features the power input for the included wall-wart power supply, the power button, and a DIN MIDI Thru port.

NiftyCASE Powered Eurorack Case    Chipz Dual VCO with LFO Module    Cellz Programmable CV Touchpad Module    Box 'o' Cables Set of Six Patch Cables    Two Blank Panels

Related Questions and Answers

Q: 1. Are the specified box dimensions the dimensions for the lightbridge case or the box that the lightbridge case ships inside? I want to see if the kit can be checked luggage without paying for oversized luggage, and the specified dimensions are a couple inches larger than the 62" standard allowance.

A: The given dimensions of 24.4 x 23.7 x 16.5" are for the kit inside its original packaging. While the manufacturer does not publish the dimensions of the case itself, it is most likely just a few inches smaller than what is mentioned for the packaging.

Q: 2. Will the PPA Receiver R-7 work with this system ?

A: The Williams Sound FM ADA KIT 1 FM ADA Compliance Kit (BH # WIFMADAKIT) pairs with Williams Sound PPA R37 or PPA R38 receivers to broadcast clear sound. As long as you have a compatible Williams Sound receiver, you can use this transmitter in movie theaters, classrooms, houses of worship, and more. The Williams Sound PPA Receiver R-7 is not compatible.

Q: 3. Can sounds be loaded into this keyboard?

A: No, it is not possible to load your own sounds into the ASM Hydrasynth Explorer Portable Digital Wave-Morphing Synthesizer Keyboard.

Q: 4. Will this fit the godox a360?

A: Hello, I have a standard reflector 18 cm in diameter with a Bounce mount. It suits him.

Q: 5. Is there a microphone included for use with the transmitter?

A: There is no microphone included, but there is a small microphone jack in the rear of the unit which I have not had the need to use. There is a cable that I run from the ADA to my mixer, and my microphone is plugged into the mixer.

Q: 6. does this come with base tripod?

A: No, there are other Mogo kits that are free standing.

Q: 7. Will this fit GODOX SL200WII?

A: Yes, the SL200W II works with the Godox Barndoor Kit.

Q: 8. Will this fit GVM SD200D Bi-Color LED?

A: The GVM SD200D Bi-Color LED Video Spotlight is compatible with the Godox Barndoor Kit.

Q: 9. Will this work with the Paul C. Buff 7 inch reflector?

A: Hi Dale, Yes, this barndoor and filter set will work on any standard 7" reflector including the one from Paul C. Buff.

Q: 10. Will this fit an aputure 300D?

A: Yes this would mount on the reflector