The black Countryman E6i Omnidirectional Earset Mic, Medium Gain with Detachable 1mm Cable and TA4F Connector for Paso Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a TA4F connector for direct connection to Paso MW223 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Paso Transmitters    Headroom for Speaking and Vocals    Detachable 1mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. What is the matching mount with the rings for this Weaver 48402 base and for what size scope tube?

A: It depends on the size of the scope. For a 30mm scope I would recommend these rings: https://bhpho.to/3wH85xo or this for a 1 inch scope: https://bhpho.to/34GrEK6

Q: 2. Will this work with the RodeLink Wireless Filmmaker Kit system?

A: Yes, the Saramonic SR-M1 can be used with RodeLink Wireless and Sennheiser transmitters.

Q: 3. Does it work with rode wireless go II? As I know not every lav mic with Rode wireless go II.

A: Yes, the Saramonic SR-M1 Omnidirectional Lavalier Microphone Cable with 3.5mm TRS Connector will work with the Rode Wireless GO II transmitter units.

Q: 4. I would like to add a scope to my Marlin81-DL which is untapped only has the side mounts for the peep site. Would this work and is there any other parts I would need or would this work alone?

A: Have you checked the compatibility list on the B&H website? Krag Cooley 60 and 600 H&R 65, 165, 150, 151, 250, 251, 264, and 265 H&R 365, 450 & 550, 755, 765, 852, and 865 Marlin A1, 50, 39A (round barrel), 88, 89, 98, 80, and 81 Mossberg 25, 26, 42, 46M, 140, 142, and 146, 45-46 with 3/4" barrels Mossberg 40, 43, 44, 144, 46BT & 35m, 45, 46 with 13/16" barrels Mossberg 320, 340, 342 & 620, 640, 50, 51, 151, 152, 350, and 352 Remington 10, 11, 12, 34*, 341*, 510, 511, 512 & 521T, 12A, 121 with 3/4" barrels Remington 121 with 13/16" diameter barrels 18, 24 & 241, 33, 513S and 513T, 514 Savage 3, 4, 5, 6, 7, 19, 23, 40, 45, 219 26, 53, 56, 66, 57, 76, 4171/2, 762, 416, 417, 418, 418 1/2 Stevens-Springfield 83, 85, 87, 872 Winchester 03, 63, 42, 52 with the hole spacing different or the same Winchester 57, 69, 61 with round barrel, 61 with octagon barrel Winchester 69A, 72, 47, 74, 75 Sporter, 75 Target, 77

Q: 5. What is spacing between side base holes...my 87a receiver machined hole for a base is @ 2 9/32"? Will the 4802 weaver #2 sidebase work with the above?

A: The manufacture does not list the spacing but the do list what is compatible. Krag Cooley 60 and 600 H&R 65, 165, 150, 151, 250, 251, 264, and 265 H&R 365, 450 & 550, 755, 765, 852, and 865 Marlin A1, 50, 39A (round barrel), 88, 89, 98, 80, and 81 Mossberg 25, 26, 42, 46M, 140, 142, and 146, 45-46 with 3/4" barrels Mossberg 40, 43, 44, 144, 46BT & 35m, 45, 46 with 13/16" barrels Mossberg 320, 340, 342 & 620, 640, 50, 51, 151, 152, 350, and 352 Remington 10, 11, 12, 34*, 341*, 510, 511, 512 & 521T, 12A, 121 with 3/4" barrels Remington 121 with 13/16" diameter barrels 18, 24 & 241, 33, 513S and 513T, 514 Savage 3, 4, 5, 6, 7, 19, 23, 40, 45, 219 26, 53, 56, 66, 57, 76, 4171/2, 762, 416, 417, 418, 418 1/2 Stevens-Springfield 83, 85, 87, 872 Winchester 03, 63, 42, 52 with the hole spacing different or the same Winchester 57, 69, 61 with round barrel, 61 with octagon barrel Winchester 69A, 72, 47, 74, 75 Sporter, 75 Target, 77

Q: 6. Could this be used with a Rode VXLR+ 3.5mm TRS female to XLR male adapter with phantom power converter to use it as a wired mic?

A: Yes, the Polsen ESM-1-35H Single-Sided Earset Microphone for Sennheiser Transmitters (B&H # POESM135H) can be used with the RODE VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter (B&H # ROVXLRP) in order to connect it to a wired XLR microphone input. As another option, you could use the similar Polsen ESM-1-MN Single-Sided Earset Microphone for Recorders and Wireless Transmitters (B&H # POESM1MN) for connection to a standard 3.5mm TRS mic input with plug-in power. Either version of the earset mic can be used with the VXLR+ adapter for connection to an XLR mic input. The difference between the two models is that the version for Sennheiser transmitters has a locking 3.5mm connector and the version for recorders has a standard non-locking 3.5mm connector.

Q: 7. Looking to mount a scope on my 22 Savage 7A. Could I use the #1 base and the 49330 rings ?

A: I would advise checking Weaver's website first and the manual on the site. https://www.weaveroptics.com/bases/detachable-side-mounts/detachable-side-mounts/1000212.html

Q: 8. Which scope rings work best with this?

A: Weaver rings would work best with Detachable Side Mount #2.

Q: 9. Is this compatible with the Tascam DR-10L, and will the plug lock to that recorder securely?

A: Yes, the Saramonic SR-UM10-M1 Omnidirectional Lavalier Microphone with Locking 3.5mm Plug is compatible for use with the Tascam DR-10L Micro Portable Audio Recorder. The mic has the same type of locking connector as the recorder so it will attach securely.

Q: 10. Does it interfere with the DJI Wireless Mic like the Rode Lavalier Go?

A: The Saramonic SR-M1 is compatible with the DJI Mic transmitter units.