The black Countryman E6i Omnidirectional Earset Mic, Medium Gain with Detachable 1mm Cable and 3.5mm locking Connector for Sky Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a 3.5mm locking connector for direct connection to Sky UT86P wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Sky Transmitters    Headroom for Speaking and Vocals    Detachable 1mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Does it work with rode wireless go II? As I know not every lav mic with Rode wireless go II.

A: Yes, the Saramonic SR-M1 Omnidirectional Lavalier Microphone Cable with 3.5mm TRS Connector will work with the Rode Wireless GO II transmitter units.

Q: 2. Which scope rings work best with this?

A: Weaver rings would work best with Detachable Side Mount #2.

Q: 3. Is the 4-pin Hirose connector the same as a Sony 4-pin connector, for example on the DWT-B01 transmitter?

A: Yes, this mic is compatible with that Sony transmitter. It's pretty decent, too!

Q: 4. Will this work with the RodeLink Wireless Filmmaker Kit system?

A: Yes, the Saramonic SR-M1 can be used with RodeLink Wireless and Sennheiser transmitters.

Q: 5. I want to mount a scope on my old 22 Savage 7A. Will the #1 base and #49330 top mount rings work?

A: The MFR needs to be contacted for this answer.

Q: 6. Will the weaver side mount base #2 mount on a Remington 513T without drilling and tapping?

A: You will have to get your 513T drilled and tapped for a weaver side mount base #2. If you want to mount it on a Remington 513T.

Q: 7. Looking to mount a scope on my 22 Savage 7A. Could I use the #1 base and the 49330 rings ?

A: I would advise checking Weaver's website first and the manual on the site. https://www.weaveroptics.com/bases/detachable-side-mounts/detachable-side-mounts/1000212.html

Q: 8. Will this work on a remington model 41 ?

A: According to Weaver it will not Works with the Remington 10, 11, 12, 34*, 341*, 510, 511, 512 & 521T, 12A, 121 with 3/4" barrels Remington 121 with 13/16" diameter barrels 18, 24 & 241, 33, 513S and 513T, 514

Q: 9. So I have a marlin 81 DL untapped open sites only but want to add a scope ...is this what I need and is there another part needed as well If so which part?

A: It is a side mount for a gun with a Weiver mount. Is that what you are trying for?

Q: 10. What is spacing between side base holes...my 87a receiver machined hole for a base is @ 2 9/32"? Will the 4802 weaver #2 sidebase work with the above?

A: The manufacture does not list the spacing but the do list what is compatible. Krag Cooley 60 and 600 H&R 65, 165, 150, 151, 250, 251, 264, and 265 H&R 365, 450 & 550, 755, 765, 852, and 865 Marlin A1, 50, 39A (round barrel), 88, 89, 98, 80, and 81 Mossberg 25, 26, 42, 46M, 140, 142, and 146, 45-46 with 3/4" barrels Mossberg 40, 43, 44, 144, 46BT & 35m, 45, 46 with 13/16" barrels Mossberg 320, 340, 342 & 620, 640, 50, 51, 151, 152, 350, and 352 Remington 10, 11, 12, 34*, 341*, 510, 511, 512 & 521T, 12A, 121 with 3/4" barrels Remington 121 with 13/16" diameter barrels 18, 24 & 241, 33, 513S and 513T, 514 Savage 3, 4, 5, 6, 7, 19, 23, 40, 45, 219 26, 53, 56, 66, 57, 76, 4171/2, 762, 416, 417, 418, 418 1/2 Stevens-Springfield 83, 85, 87, 872 Winchester 03, 63, 42, 52 with the hole spacing different or the same Winchester 57, 69, 61 with round barrel, 61 with octagon barrel Winchester 69A, 72, 47, 74, 75 Sporter, 75 Target, 77