The black Countryman E6i Omnidirectional Earset Mic, Medium Gain with Detachable 1mm Cable and LEMO 4-pin Connector for Vega Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a LEMO 4-pin connector for direct connection to Vega 77 and 677 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Vega Transmitters    Headroom for Speaking and Vocals    Detachable 1mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this cable power the Hollyland transmitter's and receivers?

A: The Tilta 2-Pin LEMO to 5.5/2.1mm DC Barrel Male Cable cannot work because of the locking connector. This is the recommended power cable. Hollyland D-Tap to 2.1mm Barrel DC Power Cable for Mars 300/400/400S BH #HOMARSDTAPDC • MFR #HL-D-TAP SPRING WIRE

Q: 2. Does 5.5/2.5mm represent the length of the plug, diameter of the plug, or both?

A: 2.5mm is a measurement of the inner diameter of the connector. 5.5 is a measurement of the outer diameter.

Q: 3. Does it interfere with the DJI Wireless Mic like the Rode Lavalier Go?

A: The Saramonic SR-M1 is compatible with the DJI Mic transmitter units.

Q: 4. Could this be used with a Rode VXLR+ 3.5mm TRS female to XLR male adapter with phantom power converter to use it as a wired mic?

A: Yes, the Polsen ESM-1-35H Single-Sided Earset Microphone for Sennheiser Transmitters (B&H # POESM135H) can be used with the RODE VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter (B&H # ROVXLRP) in order to connect it to a wired XLR microphone input. As another option, you could use the similar Polsen ESM-1-MN Single-Sided Earset Microphone for Recorders and Wireless Transmitters (B&H # POESM1MN) for connection to a standard 3.5mm TRS mic input with plug-in power. Either version of the earset mic can be used with the VXLR+ adapter for connection to an XLR mic input. The difference between the two models is that the version for Sennheiser transmitters has a locking 3.5mm connector and the version for recorders has a standard non-locking 3.5mm connector.

Q: 5. Can I power the Gratical eye HD micro Led with on the fs7?

A: no this will NOT work to power the gratical.

Q: 6. Will this shure TwinPlex TL48 work with rodelink?

A: Yes, the Shure TwinPlex TL48 Omnidirectional Lavalier Microphone can be used with a RodeLink transmitter, but a Microdot adapter such as the Deity Microphones DA35 Microdot to Locking 3.5mm Adapter - Black (B&H # DEDA35) is needed to enable compatibility

Q: 7. Will the cable work with the 600MP as well? They are both 2 pin lemo power inputs, but having this right angle version may be helpful with certain builds.

A: Yes, this cable should work with the CINEGEARS Ghost-Eye 600MP system as well.

Q: 8. Does this work on Senheiser ew100 G2 and G3?

A: Yes, the Saramonic SR-M1 can be used with Sennheiser transmitters.

Q: 9. Will this work on the RONIN 4d camera unit?

A: The DigitalFoto Solution Limited D-Tap to Right-Angle 4-Pin LEMO Cable for DJI Ronin 4D Wireless Transmitter & Monitor (3.3') is designed to be used with the DJI Transmission Transmitter or the DJI High-Bright Remote Monitor. To power the DJI Ronin 4D 4-Axis Cinema Camera 6K via D-Tap, the DJI D-Tap to DC-In Power Cable (1.6'), BH #DJPTDIPC16, would be recommended.

Q: 10. Does the windscreen come off?

A: Yes, the windscreen can be removed from the Saramonic SR-M1 Omnidirectional Lavalier Microphone Cable with 3.5mm TRS Connector (Black).