The black Countryman E6i Omnidirectional Earset Mic, Medium Gain with Detachable 1mm Cable and LEMO 3-pin Connector for Zaxcom Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a LEMO 3-pin connector for direct connection to Zaxcom TRX900AA, TRX900LA, TRX900LT, TRX900LTH, TRX900LTHS, TRX900LTS, TRXFB3, TRXLA2, TRXLA3, TRXLT3, and ZMT3 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Zaxcom Transmitters    Headroom for Speaking and Vocals    Detachable 1mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this work to power the Blackmagic Video Assist 5" 12g connected to lemo on the Core SWX V-mount battery plate for Komodo?

A: Yes, the Tilta 2-Pin LEMO to 5.5/2.5mm DC Barrel Male Cable is compatible between the Blackmagic Video Assist 5" 12G and the Core SWX V-mount battery plate.

Q: 2. Will this shure TwinPlex TL48 work with rodelink?

A: Yes, the Shure TwinPlex TL48 Omnidirectional Lavalier Microphone can be used with a RodeLink transmitter, but a Microdot adapter such as the Deity Microphones DA35 Microdot to Locking 3.5mm Adapter - Black (B&H # DEDA35) is needed to enable compatibility

Q: 3. Can I power the Gratical eye HD micro Led with on the fs7?

A: no this will NOT work to power the gratical.

Q: 4. Does it interfere with the DJI Wireless Mic like the Rode Lavalier Go?

A: The Saramonic SR-M1 is compatible with the DJI Mic transmitter units.

Q: 5. Does it work with rode wireless go II? As I know not every lav mic with Rode wireless go II.

A: Yes, the Saramonic SR-M1 Omnidirectional Lavalier Microphone Cable with 3.5mm TRS Connector will work with the Rode Wireless GO II transmitter units.

Q: 6. whenever i am using this tl45,the ambience noise is too much so what can i do to reduce the feedback or howling that is producing?

A: Do not stand in front of the speaker while the miocrophone is live. It also sounds as if the mic gain may be too high. Try lowering it so the backgrounf noise fade away and you are left with the louder speaking voice.

Q: 7. Will this work on the RONIN 4d camera unit?

A: The DigitalFoto Solution Limited D-Tap to Right-Angle 4-Pin LEMO Cable for DJI Ronin 4D Wireless Transmitter & Monitor (3.3') is designed to be used with the DJI Transmission Transmitter or the DJI High-Bright Remote Monitor. To power the DJI Ronin 4D 4-Axis Cinema Camera 6K via D-Tap, the DJI D-Tap to DC-In Power Cable (1.6'), BH #DJPTDIPC16, would be recommended.

Q: 8. Can I use this to supply power into the came-tv astral follow focus system motor which have 6 pin lemo input?

A: Yes, you can use the Tilta 2-Pin Lemo to 5.5/2.5mm DC Male Cable as long as your power source can provide 12 to 18 volts.

Q: 9. How does this mic compare to the DK3A one from Saramonic?

A: The DK3A is much higher quality (sounds better).

Q: 10. Can this be used to power the Accsoon cineye transmitters?

A: Sure, with the correct power source and outputs or adapters you could use the Tilta 2-Pin LEMO to 5.5/2.1mm DC Barrel Male Cable to power the Accsoon CineEye 2S Pro Wireless Video Transmitter & Receiver.