The black Countryman E6 Omnidirectional Earset Mic, Low Gain with Detachable 1mm Cable and TA3F Connector for Audix Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a TA3F connector for direct connection to Audix RAD360-BP wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Audix Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. To synch sound to footage shot on a Canon DSLR would this mic work via a zoom recorder?

A: The Audix SCX1/HC Studio Condenser Microphone Kit is a good option for recording audio separately into a Zoom recorder. Sync will likely have to be done manually in editing as most DSLR cameras and some Zoom models do not offer timecode onboard. It is possible to record timecode as an audio track on each device, which can be decoded by certain editing softwares for sync, if you use a device such as the Tentacle Sync E mkII Timecode Generator with Bluetooth 5.0 to feed both the camera and recorder the same timecode: https://bhpho.to/3Lj6m8W

Q: 2. Will this work on a remington model 41 ?

A: According to Weaver it will not Works with the Remington 10, 11, 12, 34*, 341*, 510, 511, 512 & 521T, 12A, 121 with 3/4" barrels Remington 121 with 13/16" diameter barrels 18, 24 & 241, 33, 513S and 513T, 514

Q: 3. Does this lavalier works with the senheiser AVx wireless system ?

A: Yes, the MKE Essential does work with Sennheiser's AVX wireless bodypack transmitters.

Q: 4. Will the weaver side mount base #2 mount on a Remington 513T without drilling and tapping?

A: You will have to get your 513T drilled and tapped for a weaver side mount base #2. If you want to mount it on a Remington 513T.

Q: 5. Will this fit a stevens springfield 84c?

A: do not know, that is only the base, for the scope you have to buy the other part to hold the scope goes pretty well on 22 caliber cooey in tear 60

Q: 6. So I have a marlin 81 DL untapped open sites only but want to add a scope ...is this what I need and is there another part needed as well If so which part?

A: It is a side mount for a gun with a Weiver mount. Is that what you are trying for?

Q: 7. I want to mount a scope on my old 22 Savage 7A. Will the #1 base and #49330 top mount rings work?

A: The MFR needs to be contacted for this answer.

Q: 8. Does the windscreen come off?

A: Yes, the windscreen can be removed from the Saramonic SR-M1 Omnidirectional Lavalier Microphone Cable with 3.5mm TRS Connector (Black).

Q: 9. Is this compatible with the Tascam DR-10L, and will the plug lock to that recorder securely?

A: Yes, the Saramonic SR-UM10-M1 Omnidirectional Lavalier Microphone with Locking 3.5mm Plug is compatible for use with the Tascam DR-10L Micro Portable Audio Recorder. The mic has the same type of locking connector as the recorder so it will attach securely.

Q: 10. Looking to mount a scope on my 22 Savage 7A. Could I use the #1 base and the 49330 rings ?

A: I would advise checking Weaver's website first and the manual on the site. https://www.weaveroptics.com/bases/detachable-side-mounts/detachable-side-mounts/1000212.html