Stereo Receiver With Rca Speaker Output

Pyle Pro Pcau46ba Stereo Audio Receiver With Bluetooth

Product Code: ga74769
Availability: In Stock

$194.97 $310.00

Qty

12 reviews Write a review

Description
Reviews (12)

Enjoy music from a variety of source types with the Pyle Pro PCAU46BA Stereo Audio Receiver. This 2-channel receiver produces up to 120W of peak power per channel at 4 ohms and features built Bluetooth connectivity for audio playback from your compatible device. A USB reader and SD card slot are also onboard, along with a stereo RCA input and a 3.5mm line input. The front 1/4" headphone output lets you enjoy private listening. The receiver's integrated FM tuner provides access to free over-the-air content.

120W per Channel Peak Output at 4 Ohms Stereo RCA, 1/8" Aux, USB Inputs SD/MMC Card Slot 1/4" Front Headphone Output 120 to 240V Switchable

Key Specs
Channels	2.0
Power Output per Channel	120 W at 4 Ohms (Peak)
Rear A/V Inputs	1x Stereo RCA
Front I/O	1x 1/8" / 3.5 mm Aux Input 1x 1/4" / 6.35 mm Headphone Output
Wi-Fi	No
Bluetooth	Yes
Amplifier
Channels	2.0
Power Output per Channel	120 W at 4 Ohms (Peak)
Frequency Response	20 Hz to 20 kHz
Audio Processing
Supported File Formats	MP3, WMA via USB/SD Card
Connectivity
Rear A/V Inputs	1x Stereo RCA
Rear A/V Outputs	No
Front I/O	1x 1/8" / 3.5 mm Aux Input 1x 1/4" / 6.35 mm Headphone Output
Other Rear I/O	1x Bluetooth Coaxial F-Type 1x FM Coaxial F-Type
Speaker I/O	2x Spring Clip Pairs
Media Card Slot	Unspecified SD
A/B Speaker Selection	No
Bi-Amp Capability	No
Wireless Connectivity
Wi-Fi	No
Bluetooth	Yes
Wireless Range	30' / 9.1 m
Control
External Control Support	No
Tuner Section
Tuner Type	FM
Power
Input Power	120 to 240 VAC, 50 / 60 Hz
Physical
Dimensions (W x H x D)	5.4 x 2.9 x 8.4" / 13.7 x 7.4 x 21.3 cm
Packaging Info
Package Weight	5 lb
Box Dimensions (LxWxH)	9.7 x 7.7 x 3.9"

120W per channel peak output at 4 ohms
Stereo RCA and 1/8" aux inputs, USB port, and SD/MMC card slot
Bluetooth connectivity to stream from your compatible devices
110/220 voltage selector with built-in short circuit and surge protection
Front control panel with LED indicator lights, bass/treble/volume rotary controls, and a power switch
Double decoder digital media function with remote
Blue LED display for media playback information
Blue LED output level indicators
Power on/off switch LED indicator
Replaceable fuse

Related Questions and Answers

Q: 1. Can you control which channels play using the remote control?

A: Yes, the remote control included with the Pyle Pro PTA62BT 6-Zone Stereo Receiver with Bluetooth (B&H # PYPTA62BT) can be used to select the audio source with the MODE button, labeled as item 5 on page 5 of the manual: https://bhpho.to/3VOmupH

Q: 2. I would like to hook up 12 outdoor speakers to this unit and a basic sub. What are the maximum watt speakers can I use? Can you suggest a couple of speakers that would be suitable.

A: The max wattage is 750watts. As long as you dont exceed that rating any 4-8ohm speaker should work fine.

Q: 3. would this stereo receiver work well paired with a set of CR5-XBT stereo monitors?

A: Yes you can use a stereo pair of RCA cables (BH #KOSRC4006) to connect the Pyle PDA6BU to the Mackie CR5-XBT monitors.

Q: 4. Can I connect my speaker to this using Bluetooth?

A: The Pyle Pro PDA6BU Stereo Receiver with Bluetooth BH #PYPDA6BU features a bluetooth receiver only. It cannot transmit a signal via Bluetooth to your speakers.

Q: 5. Can I use bare speaker wires to connect to PDA6BU?

A: Yes, the Pyle Pro PDA6BU Stereo Receiver with Bluetooth BH #PYPDA6BU can accept bare speaker wire.

Q: 6. For most Pro Amps, they publish both the watts/Channel AND the Total Harmonic Distortion. But there is no mention of THD % anywhere on this ad. Does anyone know the THD at 100w?

A: This has a T.H.D.: of 0.1% according to Pyle Pro.

Q: 7. is the Remote for this device Infrared ?

A: The Pyle Pro PTA62BT 6-Zone Stereo Receiver with Bluetooth BH #PYPTA62BT does have an infrared remote.

Q: 8. Can this be triggered to power-up (or shut-down) once a streaming signal comes/if a signal comes from wifi-streaming unit?

A: The Pyle Pro PTA62BT 6-Zone Stereo Receiver with Bluetooth BH #PYPTA62BT will not have any trigger functions.

Q: 9. How much clearance will this need for proper ventilation/cooling? The project I'm working on probably won't afford much space.

A: Pyle Pro does not specify clearance for installation, other than *Use the amplifier only in well-ventilated installations. You would want to allow some airflow to keep the component from over heating. An inch on all sides should be sufficient, but use your own judgement according to your particular setup.

Q: 10. What is the continuous power (aka RMS) and value for each channel?

A: The Pyle PTA24BT runs approximately 100W RMS.

Michael	26/09/2024
I started with trying to find an amp/receiver to fit into a confined space. This one fit that requirement. The real bonus came when it had the power to drive 2 sets of my old Bose wired speakers and kept the THD to a minimum so that I cold listen to my vinyls like I used to way back in the day. Simple 2 channel balance allows seamless sound to emanate the room. All this and Bluetooth too. Great job! 5

Howard	15/09/2024
We are using this with our CD player which doesn't have enough power to drive external speakers. It works great and has built in provision for USB drive with music. 5

Ken	14/09/2024
It works great I have it in my gage and the sound on the television is great 5

James	12/09/2024
Used this to power two KLF Clarion III 8 ohm floor speakers to use as a set of computer speakers instead of cheap computer speakers. It gets louder than I will ever need. I needed something that would take bare wire speaker cable instead of 1/8 plugs. FM reception is really good although I will not need it. I wish it had a L/R balance but for the price this does what I need. I wish it were made in Japan or the USA instead of China. 5

Loren	02/08/2024
Great product. Purchased to replace a lepai amp for bathroom ceiling speakers that seemed to be cutting off lower frequencies. I didn't expect the depth & clarity to improve so much! 5

Sandy	02/08/2024
The second one of these I have purchased as gifts for my children as they are discovering vinyl. Does everything you would want. Doesn't fill an entire shelf. The price, extraordinary. 5

Tom	23/07/2024
Had several boom box type devices before this and the sound quality is excellent with a nice set of speakers. This model is a great buy with great sound quality. 5

Randy	09/07/2024
Terrific receiver/amplifier for the money. Great FM reception and the bluetooth range is very good. Very good sound quality. The unit is very easy to configure and operate. 5

Richard	22/06/2024
Recently I had a lightening strike at my house that wiped out a few electrical devices. One was my old receiver. It was a good sized device and I hated to see it go. In researching new receivers I was pointed to this Pyle unit and decided to give it a try even though I am unfamiliar with the make and model. I was able to hook it up in very little time. (This in itself is quite a feat given my level of ineptitude with electronic devices.) To try it out I selected Bat Out Of Hell by Meat Loaf and my god, it has never sounded this good. I highly recommend it. 5

Gregory	17/05/2024
Needed a cheap amplifier for my kitchen. It exceeded my expectation. Easy setup and the quality of sound is amazing, especially considering the price. Being able to listen to the FM radio stations is a great feature as well 5