Countryman B3 Omni Lavalier Mic, Standard Sens, With Ta5f Connector For Dba, Dcht, Lma, Lmb, Lt, Pdr, Sm, Sma, Smb, Smda, Smdb, Smq, Smqa, Smqv, Smv, Smwb, Smdwb, Spdr, Um400a, And Um450 Wireless Transmitters (white)
- Product Code: ga74845
-
The white B3 Omni Lavalier Mic, Standard Sens, with TA5F Connector for DBa, DCHT, LMa, LMb, LT, PDR, SM, SMa, SMB, SMDa, SMDB, SMQ, SMQa, SMQV, SMV, SMWB, SMDWB, SPDR, UM400a, and UM450 Wireless Transmitters from Countryman is a water-resistant, miniature lavalier microphone for capturing high-quality audio. It can be used in a variety of applications such as a tie-clip lavalier in interviews, a hair-hidden mic for drama, a water-resistant mic for water sports and hurricane reporting, or simply a small mic to hide in a prop flower vase.
The B3 capsule is resistant to moisture (IP67), which allows for placement in the hair or on bare skin, and its omnidirectional polar pattern minimizes handling noise, wind noise, and plosives (popping). Furthermore, a variety of skin-matching colors are available. This B3's cable terminates to a TA5F connector for direct connection to DBa, DCHT, LMa, LMb, LT, PDR, SM, SMa, SMB, SMDa, SMDB, SMQ, SMQa, SMQV, SMV, SMWB, SMDWB, SPDR, UM400a, and UM450 Lectrosonics wireless bodypack transmitters Additionally, a carrying case, two cable clips, a windscreen, and three protective caps are also included.
For Interviews, Drama, and Water Sports TA5F (SM), See Description 20 Hz to 20 kHz Frequency Response Headroom for General Use Includes 3 Capsule Protection Grids Windscreen Cable Clips Carrying Case
Key Specs | |
---|---|
Compatible Transmitters | Lectrosonics: Dba, DCHT (with MCTA6TA5M2), LMa, LMb, LT, PDR, SM, Sma, SMB, SMDa, SMDB, SMDWB, SMQ, SMQa, SMQV, SMV, SMWB, SPDR, UM400a, UM450 |
Polar Pattern | Omnidirectional |
Frequency Response | 20 Hz to 20 kHz |
Maximum SPL | 150 dB (A-Weighted) |
Sensitivity | 4 for Standard/Most Uses (B6, B3, B2D) |
Analog Output | 1x TA5F/Mini-XLR 5-Pin Female |
Environmental Resistance | Water-Resistant (Unrated) |
Microphone | |
Compatible Transmitters | Lectrosonics: Dba, DCHT (with MCTA6TA5M2), LMa, LMb, LT, PDR, SM, Sma, SMB, SMDa, SMDB, SMDWB, SMQ, SMQa, SMQV, SMV, SMWB, SPDR, UM400a, UM450 |
Polar Pattern | Omnidirectional |
Included Tone/Pattern Caps | +4 dB Bright, +0 dB Flat, +8 dB Very Bright |
Performance | |
Frequency Response | 20 Hz to 20 kHz |
Maximum SPL | 150 dB (A-Weighted) |
Sensitivity | 12.0 mV/Pa |
Sensitivity | 4 for Standard/Most Uses (B6, B3, B2D) |
Equivalent Noise Level | 24 dB (A-Weighted) |
Connectivity | |
Analog Output | 1x TA5F/Mini-XLR 5-Pin Female |
Cable Length | 5' / 1.52 m |
Power | |
Power Sources | Plug-In Power |
Operating Voltage | 3 to 12 V (Plug-In Power) |
Physical | |
Color | White |
Environmental Resistance | Water-Resistant (Unrated) |
Dimensions | ø: 0.18 x L: 0.23" / ø: 4.57 x L: 5.8 mm |
Weight | 0.01 oz / 0.34 g |
Packaging Info | |
Package Weight | 0.495 lb |
Box Dimensions (LxWxH) | 8.7 x 5.6 x 2.3" |
Looks great when you want to see it, virtually disappears when you don't. The B3 is easily hidden in hair or on costumes, with five colors to match clothing, hair, and skin tones. Use a felt tip marker to color the white caps for near-perfect concealability. Never suffer the hassle and degraded sound quality of under-clothing miking again.
The B3 is resistant to makeup, sweat, and moisture when used with the supplied protective caps and works well in hair or on the body. The protective caps are easily removed for cleaning or replacement, and the aramid-reinforced cable gives it world-class survivability.
The B3 provides high-quality audio with low distortion at SPL up to 140 dB for wireless applications. The aramid cable and thin diaphragm combine to offer low handling noise. The flat-frequency response accurately captures voice or instruments, and the small size makes the B3 easy to position for ambient noise and feedback rejection.
Changeable protective caps let you shape the frequency response for different situations or to match other microphones. Versions are available for different speaking or singing styles, with high-overload capability for recording instruments.
Standard, for most uses.
Related Questions and Answers
Q: 1. Will the UTX-B40 work with the URX-P03 receiver. I need to replace a broken UTX-B03?
A: Yes, as long as both components operate on the same frequency band, they will work together. For example, this specific transmitter operates on the UC14: 470 to 542 MHz band, so the receiver would need to operate on the same band.
Q: 2. What's the difference between the b40 and b03 body pack?
A: The Sony UTX-B40 Wireless Bodypack Transmitter with Omni Lavalier Mic improves upon the UTX-B03 with a slightly smaller form factor, improved battery compartment, and fast, easy frequency setting with NFC Sync.
Q: 3. Will the Lectrosoincs CH12 power supply work with this?
A: Yes.
Q: 4. does this fit a Lectrosonics LMB transmitter?
A: The Lectrosonics LTBATELIM Battery Eliminator for Lectrosonics LT Transmitters is not specified for use or compatible with the Lectrosonics LMb transmitter.
Q: 5. Does this work with the SMDWB ?
A: Yes. the Lectrosonics SMBATELIM battery eliminator can be used with all SM series transmitters and will work with single or dual battery SM units.
Q: 6. How long can this mic stay in standby mode if using a lithium battery?
A: I'm not sure about standby mode but I've gotten 3.5-4 hours out of use out of the thing. I always use lithium batteries. Energizer makes two different ones though: Advanced which they say lasts up to 6 times longer and Ultimate which they say lasts up to 9 times longer. Great mic!
Q: 7. Will two of these work with the URX-P03D Dual-Channel Camera-Mount Wireless Receiver?
A: Yes it will.
Q: 8. Is there a IR sync as well on the UTX-B40 to let it auto sync with the URX-03D?
A: Yes, the Sony UTX-B40 wireless bodypack transmitter does have IR sync capability for use with the URX-P03D, URX-P03, and URX-S03D receivers
Q: 9. Is this mic set compatible with the Canon vixia HF R600?
A: The WMS-PRO system can be used with the Canon Vixia cameras. It will connect via the cameras 1/8 mic input jack. Cable is included with the system. Mounting of the receiver unit will require a bracket. The Vello CB-510 is recommended.
Q: 10. Hi there. Is there a pouch available for this unit. E.G. will this work?: BH #SOLCSURXP2
A: Yes, the Remote Audio URSA Pouch for Wireless Transmitters - Medium, Black (B&H # REUPOUCHMEBL) or the On-Stage MA1435 Wireless Transmitter Body Pack Belt - Black (B&H # ONMA1435) will work to hold the Sony UTX-B40 Wireless Bodypack Transmitter.
Top Bestselling Products
Cardellini Center Clamp
$263.61 $355.87
Nisha 77mm Center Focus Filter
$59.85 $73.62
Tiffen 6 X 6" Center Spot Filter
$944.85 $1,190.51
Tiffen 3 X 4" Center Spot Filter
$473.85 $691.82
Tiffen 4 X 4" Center Spot Filter
$915.00 $1,317.60
Feisol Ct-3401 Center Column Kit
$173.85 $217.31
Matthews Extendellini For Matthellini Center Jaw Clamp
$92.64 $133.40
Products You May Like
Simmod Signature Series 55 X 85mm Front Step-up Pro Simring
$87.00 $137.46
Dicapac Waterproof Case For Mirrorless Camera
$237.00 $374.46
Sea & Sea Optical Ys Converter/s2 For Mdx-au Housing
$1,589.85 $2,337.08
Tiffen 4x5.65" Orange #16 Glass Filter For Black & White Film
$1,197.00 $1,675.80
K&f Concept Nano-x Nd Filter (52mm, 10-stop)
$80.97 $109.31
Cartoni Lifto 25 Control Module
$7,784.01 $12,454.42
Contour Design Laptop Riser
$177.00 $247.80
Ergotron Ds100 Dual-monitor Vertical Desk Stand (black)
$1,137.00 $1,364.40
Ibuypower Trace 7 Mesh Gaming Desktop Computer (black)
$4,799.85 $6,239.81
Da-lite 34686 Da-snap Projection Screen (60 X 96")
$6,375.00 $8,606.25
Da-lite 96224es Horizon Electrol Motorized Masking Projection Screen (116" Format Width)
$11,395.50 $17,435.12
Permajetusa Oyster 271 Digital Photo Paper (a3, 50 Sheets)
$199.32 $267.09