The black Countryman E6i Omnidirectional Earset Mic, Medium Gain with Detachable 2mm Cable and 2.5mm waterproof locking Connector for Lectrosonics Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a 2.5mm waterproof locking connector for direct connection to Lectrosonics WM wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Lectrosonics Transmitters    Headroom for Speaking and Vocals    Detachable 2mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this fit a stevens springfield 84c?

A: do not know, that is only the base, for the scope you have to buy the other part to hold the scope goes pretty well on 22 caliber cooey in tear 60

Q: 2. Generally speaking, how do the specs (and sound) of this mic compare with those of the Senal UTM-86? Thanks.

A: The Lectrosonics M152/5P offers excellent quality and is highly preferred for commercial applications.

Q: 3. Will the Lectrosoincs CH12 power supply work with this?

A: Yes.

Q: 4. I have a COS-11D lavalier mic with TA5F connector for Lectrosonics. Will this adapt it for use on Sennheiser AVX transmitter?

A: The PSC Locking 3.5mm TRS to TA5F Cable for Lectrosonics PDR has a female TA5 connector meant for the Lectrosonics PDR's male TA5 input jack. It will not connect to a microphone's female TA5 output.

Q: 5. What Weaver rings are used with this, and does it place the scope over the barrel, or off to the side? Also, how do they mount to it?

A: It is a side mount. Here are the Weaver instructions: https://www.weaveroptics.com/on/demandware.static/-/Library-Sites-HuntShootAccessoriesSharedLibrary/default/dw4bf84159/productPdfFiles/49340_350_8.5x11_INSTRUCTIONS.pdf

Q: 6. Is it possible to change the connector for a XLR ?

A: You can use an adapter to convert the plug from TA5F to standard 3-pin XLR male like the Ambient Recording EMP5S Electret Microphone Power Adapter for Lectrosonics Microphones (B&H # AMEMP5S) or Lectrosonics MCA5X (B&H # LEMCA5X) which will both convert the plug to XLR and also converts phantom power to plug-in power since the mic requires 1.3 to 10V.

Q: 7. Does this cable split the signal coming from the TA5F into stereo left right, or is it a mono down mix?

A: The PSC Locking 3.5mm TRS to TA5F Cable for Lectrosonics PDR (6"), BH # PSC1134, may be used to record a stereo (left and right) signal going into the Lectrosonics PDR TA5M's stereo input.

Q: 8. How does this mic compare to the DK3A one from Saramonic?

A: The DK3A is much higher quality (sounds better).

Q: 9. Is this compatible with the Tascam DR-10L, and will the plug lock to that recorder securely?

A: Yes, the Saramonic SR-UM10-M1 Omnidirectional Lavalier Microphone with Locking 3.5mm Plug is compatible for use with the Tascam DR-10L Micro Portable Audio Recorder. The mic has the same type of locking connector as the recorder so it will attach securely.

Q: 10. I would like to add a scope to my Marlin81-DL which is untapped only has the side mounts for the peep site. Would this work and is there any other parts I would need or would this work alone?

A: Have you checked the compatibility list on the B&H website? Krag Cooley 60 and 600 H&R 65, 165, 150, 151, 250, 251, 264, and 265 H&R 365, 450 & 550, 755, 765, 852, and 865 Marlin A1, 50, 39A (round barrel), 88, 89, 98, 80, and 81 Mossberg 25, 26, 42, 46M, 140, 142, and 146, 45-46 with 3/4" barrels Mossberg 40, 43, 44, 144, 46BT & 35m, 45, 46 with 13/16" barrels Mossberg 320, 340, 342 & 620, 640, 50, 51, 151, 152, 350, and 352 Remington 10, 11, 12, 34*, 341*, 510, 511, 512 & 521T, 12A, 121 with 3/4" barrels Remington 121 with 13/16" diameter barrels 18, 24 & 241, 33, 513S and 513T, 514 Savage 3, 4, 5, 6, 7, 19, 23, 40, 45, 219 26, 53, 56, 66, 57, 76, 4171/2, 762, 416, 417, 418, 418 1/2 Stevens-Springfield 83, 85, 87, 872 Winchester 03, 63, 42, 52 with the hole spacing different or the same Winchester 57, 69, 61 with round barrel, 61 with octagon barrel Winchester 69A, 72, 47, 74, 75 Sporter, 75 Target, 77