The black Countryman E6 Omnidirectional Earset Mic, Low Gain with Detachable 1mm Cable and 3.5mm Locking Connector for Sennheiser Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a 3.5mm locking connector for direct connection to Sennheiser SK 2020-D wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Sennheiser Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Hello. I ordered from you. Why did you write the address wrong? Now I have a problem at the customs. Who will handle it? I don't understand why you did it.

A: That would be an issue for Customer Service. They can be reached by phone at 800.221.5743 or 212.239.7765. As an alternative, you can send them an e-mail to CS@bhphotovideo.com.

Q: 2. Does it really include a black ring? Isn't the original ring already black?

A: Unknown

Q: 3. What's the most space efficient wired device to get phantom power to the MKE-2 and connect it to a USB-C on a Mac? I'm only recording wired on a Mac desktop with the MKE-2. Thank you so much.

A: Take a look at this interface by Shure its the Motiv MVI https://www.bhphotovideo.com/c/product/1594654-REG/shure_mvi_dig_motiv_mvi_digital_audio.html/overview

Q: 4. im using this headset with a Clear Com AB-120 broadcast box and am having issues getting it to function correctly. when i press the talk button the microphone immediately works but only for a couple seconds and with deteriorating levels over those 2 seconds. like the plates charge and then discharge but thats it. Any thoughts on this would be a great help? Thank You.

A: I strongly suggest contacting Sennheiser and Clear Com for wiring schematics (if available) so you can troubleshoot your connections.

Q: 5. Can I use the EW-100 G3 wireless system with this microphone?

A: The Sennheiser E845 is compatible with the SKP 100 G3 plug on transmitter https://bhpho.to/2oNRp4q or the SK 100 G3 https://bhpho.to/2oKasQz when used with the CM1 cable https://bhpho.to/2il527i

Q: 6. Is it can be used for DGPS antenna ??

A: These antenna cables are designed and specified for use with Wireless microphone antenna distribution systems. Unfortunately we do not offer DGPS systems here and can not confirm compatibility. I would recommend contacting the manufacturer of your device.

Q: 7. What recovers does it work with?

A: I use this microphone with my Zoom H1 for interviews to use as back up for my wireless microphone setup.

Q: 8. What's the difference between TRS and TRSS? I will use with BMPCC 6K Pro and Fujifilm X100VI.

A: The Sennheiser CL 35 TRS Locking 3.5mm TRS to 3.5mm TRS Coiled Cable (B&H # SECL35TRS) is designed for the Sennheiser MKE 200 and MKE 400 shotgun microphones to connect with DSLR or mirrorless cameras. "TRS" means the physical connector is configured as "tip, ring, sleeve.” The "TRRS" configuration is "tip, ring, ring, sleeve." These configurations relate to the number of conductors used in the cabling and connectors. "TRRS" is common to mobile phones, tablets, and computers. The FUJIFILM X100VI Digital Camera uses a sub-mini sized (2.5mm) TRS audio/microphone input, and it is not compatible with the Sennheiser CL 35 TRS cable. The Blackmagic Design Pocket Cinema Camera 6K Pro features a 1/8"/3.5mm mini stereo TRS audio input, which is compatible with the Sennheiser CL 35 TRS cable.

Q: 9. Can the locking end to used in a normal 3.5 mm port i.e the one on the side of your camera?

A: No, the locking connector on the Sennheiser CL 35 TRS Locking 3.5mm TRS to 3.5mm TRS Coiled Cable cannot be used for connection to a non-locking 3.5mm input or output. This cable is intended for use with a Sennheiser MKE 200 or MKE 400 Shotgun Microphone or XSW-D Wireless Microphone Receiver that has a locking 3.5mm output connector, or with similar devices. If you need a similar coiled cable with standard non-locking 3.5mm TRS connectors on both ends, you can use the Kopul CMX-RC30 Right-Angle Coiled Stereo Mini Cable (B&H # KOCMXRC30B).

Q: 10. Can this be used with the Sony UWP-D21 ?

A: Yes, you can use the OLM-2 with the UWP-D21.