The light beige Countryman E6i Directional Earset Mic, Low Gain with Detachable 2mm Cable and TA3F Connector for Audix Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6i earset's cable terminates to a TA3F connector for direct connection to Audix RAD360-BP wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Audix Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Would the Lectrosonics MCSRTRS be the correct cable to work with a Lectrosonics SRb going into channels 7/8 on a Sound Devices 833?

A: That is correct so long as you have a proper output sled with two ta3m outputs for the SRb.

Q: 2. Could this item be used with AKG lavalier mics?

A: Not at all. It is compatible with these Audix Microphones only: ADX10, ADX40, ADX60, HT5, ADX10FL, HT2, ADX20i and Micro-D

Q: 3. will this power up an MKH 60 ?that needs phantom power,and then connect the output to a wireless plugon that does not supply phantom

A: No, the Audix APS910 will not work with the MKH 60 because it converts 48V phantom power to plug-in power of less than 9V for lavalier and headset mics. As a better option, use the Sennheiser K6 Microphone System Powering Module (B&H # SEK6Q) which uses a AA battery to supply phantom power and has standard XLR connectors on both sides.

Q: 4. Can this item be used to verify the proper operation of neck loops purchased with Assistive Listening Systems for hearing impaired individuals?

A: The V1-10610 from Otto Engineering is a standard in-ear induction receiver for use with neck loop inductors, so it could be used to test the operation of those neck loops.

Q: 5. Does this work with Sennheiser ME-2 Microphone Mic Lavalier?

A: No. It seems to only be compatible with Audix mikes. I bought one to use with a Shure Beta 54 mic, but it doesn't work - even though they both have the mini-XLR connector, the Shure has one more pin than the Audix. The Sennheiser ME-2 has a 1/8 connector, so it wouldn't work with the Audix adapter at all.

Q: 6. Can this be used with condenser podium mics such as the Shure Centraverse CVG18-B/C?

A: This adapter is meant to be used with specific Audix mics utilizing a ta3f connection. This would not be compatible with standard XLR mics like the Shure CVG18-B/C.

Q: 7. This strap can fit Sony uwp D21 transmitter ?

A: Yes, the Viviana Medium Wireless Transmitter Waist Strap should fit Sony UWP Series bodypack transmitters such as the UWP-D21 well.

Q: 8. how big is the mic itself?

A: The mic is about 8 long and 1/2 inch in diameter. The included windscreen is just an inch wide and the included cable is 50 in length.

Q: 9. Does this work with television viewing?

A: The SHOKZ OpenFit Open-Ear True Wireless Earbuds (Black) BH # SHT910STBK will work with televisions offering Bluetooth pairing.

Q: 10. which airline micro wireless to go with at zip code 25560?

A: It doesn't really matter you can pick whatever frequency block you want. It only matters if you start running multiple systems at the same time.