The light beige Countryman E6i Directional Earset Mic, Low Gain with Detachable 2mm Cable and LEMO 4-pin Connector for Beyerdynamic Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6i earset's cable terminates to a LEMO 4-pin connector for direct connection to Beyerdynamic TS 316, TS 400, and TS 600 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Beyerdynamic Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Does this connect to the Atomos Shinobi 7” ?

A: Yes, the Tilta 2-Pin LEMO to 5.5/2.1mm DC Barrel Male Cable (21.75") would work as a power cable for the Atomos Shinobi 7" 4K HDMI/SDI Monitor.

Q: 2. This is isn't the same as a 2-pin power cable that the bmpcc4k uses is it?

A: It is not the connection used on the Pocket 4K/6K.

Q: 3. Will this work to go from the Blackmagic studio camera 4K to a gold mount battery dc?

A: No this will not. You will need a specific cable for powering the Blackmagic Studio Camera 4K from a gold mount battery. Please contact Black Magic Design for more information.

Q: 4. Can this be used to power the Accsoon cineye transmitters?

A: Sure, with the correct power source and outputs or adapters you could use the Tilta 2-Pin LEMO to 5.5/2.1mm DC Barrel Male Cable to power the Accsoon CineEye 2S Pro Wireless Video Transmitter & Receiver.

Q: 5. Will this cable work to power the SmallHD Cine 5 screen when connected to a V-mount battery?

A: No, the Tilta 2-Pin LEMO to 5.5/2.5mm DC Barrel Male Cable (15.74") will not but the Tilta 2-Pin LEMO to 5.5/2.1mm DC Barrel Male Cable (21.75") will power the SmallHD Cine 5.

Q: 6. Will the lemo work with 2-pin input on Teradek?

A: We recommend staying within Teradek branded lemo adapters to avoid polarity issues.

Q: 7. Will the cable work with the 600MP as well? They are both 2 pin lemo power inputs, but having this right angle version may be helpful with certain builds.

A: Yes, this cable should work with the CINEGEARS Ghost-Eye 600MP system as well.

Q: 8. Will this work with the Tilta ronin rs2/3 base plate

A: Yes, the Tilta 2-Pin LEMO to 5.5/2.5mm DC Barrel Male Cable (15.74") can be used with the Tilta Battery Plate for Power Pass-Through Plate for DJI RS 2 (V-Mount) or the Tilta Battery Plate for Power Pass-Through Plate for DJI RS 2 (Gold Mount).

Q: 9. Does this work with the Ninja V Battery Eliminator?

A: The Tilta 2-Pin LEMO to 5.5/2.5mm DC Barrel Male Cable will not work with the Ninja Battery Eliminator. We recommend using the following cable. https://bhpho.to/3mVFmCi

Q: 10. Will this work to power ronin rs2 base plate?

A: Yes, this cable can power the DJI RS2 Baseplate.