The black Countryman E6i Omnidirectional Earset Mic, Medium Gain with Detachable 2mm Cable and 3.5mm locking Connector for Azden Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a 3.5mm locking connector for direct connection to Azden older 10BT and 41BT wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Azden Transmitters    Headroom for Speaking and Vocals    Detachable 2mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this work with the new Atomos Ninja?

A: No, the CAMVATE Power Cable with Locking Right-Angle Connector for Atomos/SmallHD 702 (2.5 to 2.5mm) would not be compatible with the Atomos Ninja 5.2" 4K HDMI Recording Monitor as the battery eliminator DC connection is a 2.1mm DC barrel.

Q: 2. will the non-locking end connect to the Small Rig V-battery 12v output?

A: The CAMVATE Power Cable with Locking Right-Angle Connector for Atomos/SmallHD 702 (2.5 to 2.5mm) will support the 1 x Barrel 2.5 mm Output 12 V Regulated of Smallrig VB batteries,

Q: 3. What Weaver rings are used with this, and does it place the scope over the barrel, or off to the side? Also, how do they mount to it?

A: It is a side mount. Here are the Weaver instructions: https://www.weaveroptics.com/on/demandware.static/-/Library-Sites-HuntShootAccessoriesSharedLibrary/default/dw4bf84159/productPdfFiles/49340_350_8.5x11_INSTRUCTIONS.pdf

Q: 4. Will this work with a Rode go system?

A: This microphone is designed to connect directly to the lightning port of your iPhone or iOS device. It will also connect to the RODE Wireless GO transmitter. NOTE: Multi-Section, Multi-Use Cable: The cable is made of two sections: a first section with the lav mic at one end and a 3.5mm TRS female connector at the other, and a second section with a 3.5mm TRS male connector at one end and an MFi Certified Lightning connector at the other. This two-section cable facilitates multiple purpose. Use the first section of the cable to route the mic into iOS devices that still offer conventional 3.5mm jacks. Conversely, the second section can be used to connect either the lav mic or any audio device with a 3.5mm TRS output (including wireless receivers and media players) to your iPhone or iPad.

Q: 5. Is this compatible with Boya WM4 wireless system?

A: Yes this mic would work woth the Boya WM4

Q: 6. How can I connect both my headphones AND the mic to my iPhone? Thanks!

A: The Saramonic SR-EA2D Audio Adapter with Lightning Connector (BH #SASREA2D) can be used to connect the Saramonic LavMicro U1A Omnidirectional Lavalier Microphone to an iPhone while also connecting headphones for monitoring. In this scenario, the microphone would use its 3.5mm TRS connection as opposed to the included TRS to Lightning cable adapter.

Q: 7. What extension would I use to get more length to a DSLR?

A: We recommend BH #ROVC1 Rode VC1 3.5mm TRS Microphone Extension Cable for Cameras (10') for extending the length of the Rode Lavalier II Omnidirectional Lavalier Microphone: https://bhpho.to/3rvCsWB

Q: 8. can I monitor what the mic is picking up through headphones?

A: Yes, headphones can be used to monitor the audio that the mic is picking up. Since the mic does not have its own built-in headphone jack, you will need to connect headphones to the headphone jack on your camera or recorder (or any other device you connect the mic to) in order to monitor the audio.

Q: 9. We purchased this microphone and now need batteries. Must we use the Azden rechargeable batteries or will any NIMH rechargeable battery work?

A: Only the Azden batteries (1HR-3U) will charge while inside the IRH-15C. Using another brand of rechargeable batteries will work but will have to be charged outside of the unit. Alternatively, any brand of one-time-use alkaline batteries may be used.

Q: 10. Is the windscreen removable?

A: Yes, the windscreen for the Saramonic SR-M1 Omnidirectional Lavalier Microphone is removable.