The cocoa Countryman E6i Omnidirectional Earset Mic, Medium Gain with Detachable 1mm Cable and 3.5mm Connector for Comtek Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a 3.5mm connector for direct connection to Comtek M-72 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Comtek Transmitters    Headroom for Speaking and Vocals    Detachable 1mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Is this compatible with Boya WM4 wireless system?

A: Yes this mic would work woth the Boya WM4

Q: 2. Can this microphone be calibrated for use with OSHA noise level screening?

A: According to the manufacturer, each MicW i437L is calibrated at the factory and complies with the IEC 61672 Class 2 sound level meter standard. For any information about special calibration, please contact MicW. You can reach them by phone at 425-635-8117. The company's US offices are located in the state of Washington (Pacific Standard Tine).

Q: 3. Will this work with a Rode go system?

A: This microphone is designed to connect directly to the lightning port of your iPhone or iOS device. It will also connect to the RODE Wireless GO transmitter. NOTE: Multi-Section, Multi-Use Cable: The cable is made of two sections: a first section with the lav mic at one end and a 3.5mm TRS female connector at the other, and a second section with a 3.5mm TRS male connector at one end and an MFi Certified Lightning connector at the other. This two-section cable facilitates multiple purpose. Use the first section of the cable to route the mic into iOS devices that still offer conventional 3.5mm jacks. Conversely, the second section can be used to connect either the lav mic or any audio device with a 3.5mm TRS output (including wireless receivers and media players) to your iPhone or iPad.

Q: 4. Will this work with a Windows PC that has a USB C port?

A: Yes you can use the Saramonic LavMicro U3B with a Windows PC that has a USB-C port.

Q: 5. Will this work with TV? Will it work with the plugged-in microphone at church? (It works fine with the microphone in the Chapel.)

A: The Comtek PR-75a AutoSmart-Tuning receiver is designed to integrate with non-compand transmitters tuned to 72-76 MHz. Both a TV and an audio system in a church would need to have a transmitter like the M-175 or BST-75 in order for the PR-75a receiver to work.

Q: 6. How is it best to clean ear buds when there are multiple users? My church won't provide the ear pieces so I bring my own.

A: You can clean your earbuds with a damp cloth and a small amount of mild soap, like a drop of dish soap. A toothbrush can be used to gently remove any wax that may be built up. There are also cleaning products available like HygenX by HamiltonBuhl (B&H # HAX19HRSB), which is specifically for cleaning headphone and earbuds.

Q: 7. What is the typical range with clear line of sight?

A: The Comtek PR-75a AutoSmart-Tuning Wireless Monitor Receiver (72 to 76 MHz) will give you a range of up to around 100-feet in the most ideal conditions.

Q: 8. Is it analogue microphone?

A: Technically, yes, but in this instance, no, The microphone itself is analog, however the USB-C on the LavMicro U3B Omnidirectional Mic has a 16 Bit A/D converter, which means it is sending a digital signal over USB-C, and not an analog audio signal.

Q: 9. How can I connect both my headphones AND the mic to my iPhone? Thanks!

A: The Saramonic SR-EA2D Audio Adapter with Lightning Connector (BH #SASREA2D) can be used to connect the Saramonic LavMicro U1A Omnidirectional Lavalier Microphone to an iPhone while also connecting headphones for monitoring. In this scenario, the microphone would use its 3.5mm TRS connection as opposed to the included TRS to Lightning cable adapter.

Q: 10. Does it work with iPhone 15 Pro?

A: Yes, the Saramonic LavMicro U3C Dual Omnidirectional Lavalier Microphones with USB Type-C Connector for Android Devices (19.6' Cable) would work with the iPhone 15 Pro.