The black Countryman E6 Omnidirectional Earset Mic, Low Gain with Detachable 1mm Cable and 3.5mm Locking Connector for Sony Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a 3.5mm locking connector for direct connection to Sony ZTX-B01 and ZTX-B02RC wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Sony Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Would the 44-b use the XLR-Line or the XLR-Mic audio setting on the camera?

A: The ECM-44B is a microphone, so it outputs mic-level voltage. You would want to use the mic level setting on your camera or recording device.

Q: 2. Will this mic work with Scarlett Focusrite 2i2?

A: Yes, the microphone will work with the interface. However, please note: battery power only, does not accept phantom power.

Q: 3. Can this be used with the original wireless go system?

A: Yes, the Rode Lavalier II Omnidirectional Lavalier Microphone can be used with the original Rode Wireless GO system.

Q: 4. How long is the actual cord?

A: 10 feet

Q: 5. Is this 2.5mm on both ends?

A: Yes. 2.5 to 2.5mm

Q: 6. is there a difference between the ECM-44 or the ECM-44b?

A: The Sony ECM 44 is a series of microphones supplied with different connectors depending on application. The ECM44-B is supplied with a AA battery power supply with an XLR connector permanently attached.

Q: 7. Can this be used with Rode wireless Go system?

A: Yes, the Rode Lavalier II Omnidirectional Lavalier Microphone is compatible with the Rode Wireless GO II system.

Q: 8. Can you remove the locking ring?

A: The locking mechanism on the Rode Lavalier II Omnidirectional Lavalier Microphone (Black) is not standardly removable.

Q: 9. will the non-locking end connect to the Small Rig V-battery 12v output?

A: The CAMVATE Power Cable with Locking Right-Angle Connector for Atomos/SmallHD 702 (2.5 to 2.5mm) will support the 1 x Barrel 2.5 mm Output 12 V Regulated of Smallrig VB batteries,

Q: 10. Connecting with the Kopul Low to High Impedance Transformer should the camera use the 3.5mm LINE or 3.5mm MIC setting?

A: When connecting the Sony ECM-44B Omnidirectional Lavalier Microphone to a 3.5mm input on a camera using the Kopul LMT100 Low to High Impedance Matching Transformer (B&H # KOLMT100), set the camera's input level on the mic level setting.