The black Countryman E6 Omnidirectional Earset Mic, Low Gain with Detachable 2mm Cable and TA4F Connector for Anchor Audio Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a TA4F connector for direct connection to Anchor Audio WB-6000, WB-6400, and WB-8000 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Anchor Audio Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Can this be used with Rode wireless Go system?

A: Yes, the Rode Lavalier II Omnidirectional Lavalier Microphone is compatible with the Rode Wireless GO II system.

Q: 2. Can you remove the locking ring?

A: The locking mechanism on the Rode Lavalier II Omnidirectional Lavalier Microphone (Black) is not standardly removable.

Q: 3. Does this direct one mic to the left channel and the other to the right or does it mix the two?

A: No, the Comica Audio CVM-D02 Dual Omnidirectional Lavalier Microphones combine the signal from both mics to a dual mono signal so you hear both mics mixed together on the left and right channels, not on separate sides. For a dual lavalier microphone that will route the audio from each mic to a separate channel, consider the Polsen OLM-20 Dual Omnidirectional Lavalier Microphone (B&H # POOLM20).

Q: 4. Is the system able to manually disable bluetooth mode on and off?

A: Yes, the Bluetooth functionality of the Anchor Audio BEA-QUAD-HHBB Beacon 2 Quad Package Portable Line Array Sound System is manually enabled and disabled with the dedicated Bluetooth volume knob on the Beacon 2 speaker. Clicking the volume knob on initiates the first step in pairing an external device.

Q: 5. How do we distinguish between anchors version 3 and version 4?

A: Peak Design AL-4 Anchor Links has a thicker cord and the logo is only in one side compare to the V3 anchors.

Q: 6. Is this compatible with Boya WM4 wireless system?

A: Yes this mic would work woth the Boya WM4

Q: 7. Will this Rode VXLR 3.5mm TRS Female to XLR Male Adapter allow me to hook the mics up to a sound system?

A: Yes. This Comica Audio CVM-D02 Dual Omnidirectional Lavalier Microphones for DSLR Cameras, GoPro, and Smartphones (Black, 14.7' Cable) While the CVM-D02 is designed for use with cameras and/or smart phones, which do provide plug in power... The Rode VXLR will convert Phantom Power from a mixer to plug in power. See below and be sure to have Phantom Power turned on on the mixer! Rode VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter B&H # ROVXLRP MFR # VXLR+ 29 Reviews Key Features Connects 3.5mm Source to XLR Input For Lav/Headset/Shotgun Mics & Wireless Converts Phantom Power to Plug-In Power Threaded 3.5mm TRS Female to XLR Male

Q: 8. Could this be used to connect a Rode VideoMicMe to iPhoneX?

A: No it will not work.

Q: 9. Is the windscreen removable?

A: Yes, the windscreen for the Saramonic SR-M1 Omnidirectional Lavalier Microphone is removable.

Q: 10. Will this work with AirPods Max to a 3.5mm jack?

A: Yes, the Thore 3.5mm Audio to Lightning Connector Aux Cable is compatible with the Airpods Max.