The black Countryman E6 Directional Earset Mic, Low Gain with Detachable 1mm Cable and TA4F Connector for CAD Audio Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a TA4F connector for direct connection to CAD Audio WX155A wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits CAD Audio Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Compatible with D3500?

A: No it is not compatible with D3500 , UC-E20 is compatible Nikon UC-E20 Micro USB Cable B&H # NIUCE20

Q: 2. Does this cable work with batteries having a p-tap connector? Are d-tap and p-tap compatible or exactly the same?

A: If I'm not mistaken, D-tap (named after the shape) and P-tap (abbreviated from PowerTap) are the same connector and interchangeable. In my experience, D-tap is the more common nomenclature in the UK, whereas P-tap is more common the US (and probably Canada). The only other variety I know of is Blueshape's B-tap which is propriety and a different shape.

Q: 3. I recently lost the cable to my S8100. The original also charged the battery while it was plugged into my computer's USB port. Will this do the same?

A: Yes; the Nikon UC-E6 USB Cable (4.5') is the replacement USB cable that was originally included with the purchase of the Nikon CoolPix S8100 Digital Camera.

Q: 4. Will this work with AirPods Max to a 3.5mm jack?

A: Yes, the Thore 3.5mm Audio to Lightning Connector Aux Cable is compatible with the Airpods Max.

Q: 5. How long is the cord for these headphones?

A: The cord is 2.8 meters in length.

Q: 6. Is this xlr cable not shielded?

A: The Remote Audio Low-Profile XLR3F to XLR3M Balanced Coiled Jumper Cable is a shielded cable.

Q: 7. What boom pole do you suggest for this mic?

A: The Williams Sound MIC 027 can be used with a shockmount to attach it to the male thread on any standard boompole, such as Rode's Micro Boompole (B&H# ROMICROBOOMP) or the On-Stage MBP7000 (B&H# ONMBP7000). Auray's DUSM-1 (B&H# AUDUSM1) and Azden's SMH-1 (B&H # AZSMH1) are both universal shockmounts which have a shoe mount for use on a camera as well as a 3/8" female thread on the bottom that attaches to the male thread on a boompole.

Q: 8. Does CAD CX2 work with cakewalk and Bandlab?

A: Although we have not tested it, the CAD CX2 Connect II 2x2 USB Audio Interface should work with both Cakewalk and BandLab Digital Audio Workstations. The interface is compatible with almost any recording software on Windows or Mac laptop or desktop computers.

Q: 9. Does CAD Cx2 work with the band lab?

A: Although we have not tested it, the CAD CX2 Connect II 2x2 USB Audio Interface should work with BandLab Cloud Digital Audio Workstation. The interface is compatible with almost any recording software on Windows or Mac laptop or desktop computers.

Q: 10. Will this cable work with Nikon d5100 camera?

A: Yes; the Nikon UC-E6 USB Cable (4.5') is the USB cable that is originally included with the Nikon D5100 DSLR camera.