The black Countryman E6 Directional Earset Mic, Low Gain with Detachable 1mm Cable and TA4F Connector for Line 6 Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a TA4F connector for direct connection to Line 6 TBP12 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Line 6 Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Does this work with and it is essential if I want to connect my TASCAM DR-05 to my Canon 7D?

A: In order to connect the output of Your Tascam recorder to the mic input of a DSLR, you will need an attenuator cable such as this Sescom cable. It will allow the camera to receive a safe audio level, and retain headphone monitoring.

Q: 2. Is this compatible with android devices?

A: You can use the Kopul ACH4-25MON with an Android device but you will need to use it with a 3.5mm TRRS adapter to convert the plug from 3.5mm TRS to TRRS since smartphones have a 3.5mm TRRS connector. The Rode SC4 3.5mm TRS Female to 3.5mm Right-Angle TRRS Male Adapter Cable for Smartphones (B&H # ROSC4). Another option would be to use a similar cable that already has a TRRS connector such as the Movo Photo TCB2 XLR Female Microphone to 3.5mm TRRS Male Smartphone Adapter (B&H # MOTCB2) or the MXL Female XLR to 3.5mm Male TRRS and 3.5mm Female TRS Multimedia Adapter Cable (B&H # MXMMCABLE1).

Q: 3. Compatible with Canon 70D and Canon T3i?

A: This cable will work with both cameras.

Q: 4. Hi, Can I connect my zoom H4n to my Panasonic Gh4 with my k6/me66 senhiessen mic for recording into GH4? with this cable.

A: Yes, this cable will be compatible for the setup you describe Sunil.

Q: 5. I would like to connect the audio output of the headphone jack of my JVC HM750 video camera into my GoPro camera. Is this the proper Headphone Tap Cable to do so or would you recommend another type of Headphone Tap Cable sold by B&H?

A: This cable will allow you to connect from the headphone output of your JVC to the input of camera, Go Pro included.

Q: 6. Does this work with the zoom H1?

A: This is the cable for the Zoom H1. B&H # SEL2MZMH4MON

Q: 7. This attenuator cable is -25 dB. Other cables are -35dB. What cable is more suitable for Tascam DR40, DR40X ?

A: If using this to connect a DR40 into a camera, the -25db cable would be fine to ensure a strong enough level into the preamp of the camera while not overloading it.

Q: 8. There are Kopul ACH4-25MON and Kopul ACDR-35. One has 25dB of Attenuation and the other one has 35dB of Attenuation. Please clarify: When to choose the first one and when the second one?

A: Both cables will provide sufficient attenuation for use padding a line level output signal from a device such as a portable audio recorder in order to match the mic level input on a camera or device with a 3.5mm mic input. -25 dB is typically enough, but -35 dB will provide even more attenuation. A higher level of attenuation would be needed if the -25 dB attenuation level is still overloading the mic input or if more headroom is desired.

Q: 9. Is this cable absolutely necessary if connecting the Zoom H6 to the mic input on a Canon EOS SL3 DSLR ?

A: Yes you will need an attenuating cable to adjust the outgoing line level audio signal to the microphone level required by the camera.

Q: 10. Is the item compatible with the Canon 6D?

A: DSLR Compatibility: The ACH4-25MON is compatible with DSLR cameras that feature a 1/8 unbalanced mic level input including: Canon: EOS Rebel T2i(550D)/T3i(600D)/T4i(650D)/T5i(700D)/SL1(100D) EOS 60D/70D/7D/6D EOS 5D MK ll/MK lll EOS 1DX/1DC/1D MK lV