The Countryman E6s Omnidirectional Microphone is a miniature earset microphone for virtually invisible operation. The compact size and placement just in front of the ear make this microphone particularly well-suited for intimate theater and broadcast applications, or any use where low mic visibility is a key factor.

The omnidirectional pickup pattern provides a generous and forgiving pickup area around the perimeter of the capsule, while the stainless steel construction stands up to daily use, makeup, and sweat. The mic also comes with 3 different interchangeable caps that let you choose between a flat, bright, or very bright frequency response.

This version of the E6s is black and comes with a 2mm diameter Duramax cable. It terminates to a Switchcraft TA3-F connector for use with AKG wireless transmitters.

Omnidirectional Pickup Pattern    Discreet Design    Stainless Steel Construction    2mm Diameter Duramax Cable    Switchcraft TA3-F Connector    Interchangeable Frequency Response Caps    Optimized for Powerful Vocals

The miniature design is ideal for use in applications where visibility is a key factor, such as intimate theater settings and broadcasting

The stainless steel construction allows the mic to stand up to daily use, makeup, and sweat. When used with the included caps, the mic is virtually waterproof

The included 2mm diameter Duramax cable detaches easily from the headset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy, as they are available with a wide selection of connectors to accommodate various wireless transmitters

The omnidirectional polar pattern is effective in minimizing handling noise from fabric and wind

The mic comes with 3 interchangeable caps that provide you with a flat, bright, or very bright frequency response

The mic has a low sensitivity that is ideal for powerful vocal applications

Related Questions and Answers

Q: 1. which b6 would be the right one to use with a rodelink wireless filmmaker kit

A: The one you selected will work fine. So will this one:Countryman B6 Omni Lavalier Mic, Standard Sens, with Hardwired 3.5mm Locking Connector for Sennheiser Wireless Transmitters (Black) B&H # COB6W4BSR

Q: 2. Is the connector screw on (lockable)?

A: Hello John, This microphone has a hardwired termination of the connector. Hope that helps!

Q: 3. Is this the model with the standard 3.5mm plug without locks?

A: This microphone offers a non-locking 1/8 (3.5mm) Mini Connector for Azden transmitters.

Q: 4. WILL THIS WORK WITH B6W4FF05BSL?

A: This model of the Countryman B6 features an 1/8 locking connector for use with Sennheiser wireless transmitters. The B6 with model number B6W4FF05BSL features a 4 pin female connector (TA4F) that is compatible with Shure brand wireless mic transmitters. Please contact a Sales Representative here at 800-606-6969 or audio@a href= http://bandh.com target= _blank bandh.com/a if you require assistance in locating a mic for your specific application.

Q: 5. Cananyone tell me how this performs if you have two speakers close to each other? Is there significant mic bleed between two mics in close proximity (like guest/host interview?) And if used over a PA or speaker system, does the PA bleed into the Mic? Thanks!

A: Two people can be sitting or standing next to each other and there will be minimal bleed. These mics are omnidirectional, but are finely tuned to supress feedback, if P.A. speakers are placed in front of the talent, facing away. I would recommend this pick-up pattern to allow subjects to move their heads back and forth, without volume fluctuating.

Q: 6. Will this work with a Tentacle Track-E recorder?

A: Yes, the Countryman B6 Omni Lavalier Mic, Standard Sens, with Hardwired 3.5mm Locking Connector for Sennheiser Wireless Transmitters (Black) would be compatible with the Tentacle Track-E recorder.

Q: 7. has anyone tested this with sonys URX-P03 receiver pack?

A: Yes. It does not fit well unfortunately.Fits fine with the Senheiser.

Q: 8. Does the microdot (SE) connecter allow you swap between 3.5mm locking and XLR connectors?

A: Yes, the Microdot connector is hardwired to the cable for this Countryman B6 Omni Lavalier Mic, and you can use adapters to convert the Microdot connector to XLR or locking 3.5mm TRS.

Q: 9. Will this work with the Zoom H1?

A: If the Zoom H1 has plug in power on the mic entrance, it will work. Look in the menu.I personally never tried with a Zoom H1, but I worked with a Zoom H2 and H2n with the B6. Works great. You only need a 3,5mm Jack on the B6.

Q: 10. Is this product compatible with SONY UTX-B03?What is the difference between D2 and D3 of 3.5mm Locking Connector?

A: No it may not work correctly. You need the ones that are wired with a 3.5mm Locking connector for Sony and the ones that the catalog number ends with SN See item# COB6W4BSN