The black Countryman E6 Omnidirectional Earset Mic, Low Gain with Detachable 2mm Cable and 4-Pin Hirose Connector for Sony Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a 4-pin Hirose connector for direct connection to Sony DWT-B01, DWT-G01, DWT-S01, and DWT-V01 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Sony Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. will this work for Panasonic Palmcorder VDR-M30? the connector looks the same

A: No, this is for specific Sony models only.

Q: 2. How long is the actual cord?

A: 10 feet

Q: 3. Will this cable work with the Sony CCD TRV118 handyman?

A: No, the Sony TRV118 does not have the 10-pin A/V port. It has a mini port. This cable will work: https://www.bhphotovideo.com/c/product/1000102-REG/pearstone_mavc_103_mini_to_3_rca.html

Q: 4. will this work with a Sony handycam hdr fx7?

A: This cable works with cameras with this type of connector, no problem, just set from the menu of the camera

Q: 5. I need a mike to match with an old ECM-50PS. Would this have similar sonic, gain characteristics?

A: It's close for our purposes but we just do talking heads. We are on a limited budget and purchased them. I would suggest 55B if you want to match 50PS

Q: 6. will this cable work with a Sony DCR-HC52 handicap?

A: Hi, yes this is the correct cable for the Sony DCR-HC52. Thank you for shopping at B&H!

Q: 7. I am looking at purchasing this mic to use when making videos with my Canon 5D Mark III. I will need an XLR cable that will be compatible with the 3.5mm mic jack on the camera, but I have had an audio phasing problem before when using a friend's mic (this same model) and an XLR cable. Do I need a certain XLR cable so I won't have the audio phasing problem?

A: Not all XLR to 3.5mm are wired correctly for this application. we do offer solutions that will allow you to correctly connect XLR mics toa DSLR or similar device. The Kopul LMT-100 is a great choice. This will convert the XLR to your mini jack input as well as match impedance. For a longer cable solution the Hosa Camcorder cables are also wired correctly.

Q: 8. Will this work for a sony handycam trv 460? I'm trying to use it with a elgado analog to digital converter. Thanks.

A: The Pearstone 10-Pin A/V Cable for Sony Handycam (5 ft) will not work for the Sony Handycam TRV 460. This camcorder will use an A/V Mini Jack instead of the Sony 10-Pin Output. You can use the Pearstone Mini AV to 3 RCA Cable (3 ft) (BH #PEMAVC103 • MFR #MAVC-103) for connecting to the Elgato Analog to Digital converter.

Q: 9. Would the 44-b use the XLR-Line or the XLR-Mic audio setting on the camera?

A: The ECM-44B is a microphone, so it outputs mic-level voltage. You would want to use the mic level setting on your camera or recording device.

Q: 10. is there a difference between the ECM-44 or the ECM-44b?

A: The Sony ECM 44 is a series of microphones supplied with different connectors depending on application. The ECM44-B is supplied with a AA battery power supply with an XLR connector permanently attached.