The black Countryman E6 Omnidirectional Earset Mic, Low Gain with Detachable 2mm Cable and 3.5mm Locking Connector for Senal Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a 3.5mm locking connector for direct connection to Senal AWS-2000T wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Senal Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. This is it?

A: Yes

Q: 2. Hi Is this compatible with Sony URX-P03 Camera-Mount Receiver?

A: Yes it is.

Q: 3. Can you record and monitor thru the head set at the same time?

A: Yes -the adapter is designed to monitor the audio feed from the microphone.

Q: 4. What is this?

A: A handheld mic

Q: 5. Is this 2.5mm on both ends?

A: Yes. 2.5 to 2.5mm

Q: 6. In a larger area can multiple Omnidirectional mics be used without the mics be affected by signal interference with each other?

A: Unless you have some sort of physical separator like a barrier between the two microphones, you will not be able to keep the two MXBM-610/O Condenser microphones from picking up other sounds in the room as it is an Omnidirectional mic. A directional microphone would be much more appropriate for this kind of application if you are looking to cut down on bleed between mics.

Q: 7. Is the Senal Right-Angle Locking 1/8" Mini to 3-Pin XLR Output Cable (15") a truly balanced connector?

A: Yes. This is a balanced connector.

Q: 8. Does this work with Sennehiser wireless receivers?

A: Yes it does

Q: 9. Can this be used with a laptop mic jack to record into Adobe Audition software?

A: The Senal OLM-2 is designed specifically for connection to the Sennheiser EW wireless transmitters. It requires power that needs to be supplied from the connection source, and may not be able to be supplied by your computer. in addition the connector features a locking collar that is not compatible with many standard input jacks.

Q: 10. Will this cable work with the RodeLink Filmmaker receiver?

A: No. Suggest using the Rode 3.5mm to 3.5mm with below adaptor: https://www.bhphotovideo.com/c/product/387850-REG/Rode_VXLR_VXLR_Mono_Mini_Jack.html