The black Countryman E6 Directional Earset Mic, Low Gain with Detachable 1mm Cable and LEMO 4-Pin Connector for Vega Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a LEMO 4-pin connector for direct connection to Vega 77 and 677 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Vega Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Hi there, It states this works with DSMC2 cameras, however the power input in 4 pin, this cable is 6pin, will it still work?

A: The RED DSMC2 cameras offer a 6-Pin 1B DC IN through the modules, and the Kondor Blue D-Tap to LEMO 6-Pin Cable for RED RAPTOR DSMC2/DSMC3 & KOMODO X (20") provides that connection to power the camera from an external brick battery through D-Tap.

Q: 2. Can this also be used while charging on wall power, i.e. using it like a Canon DR-E6C DC Coupler?

A: Unfortunately, it is not possible to charge, as well as power a camera at the same time with the Anton/Bauer Titon Base Kit for Canon LP-E6-Powered Cameras. The kit will not work as a dummy battery coupler when connected to wall power.

Q: 3. How after charging the battery turn off for preservation of the charging

A: The Anton Bauer 68Wh Titon Base Battery will turn itself off automatically. The Titon Base will shut off after a few minutes when it is not connected to the power supply or accessory that requires power.

Q: 4. (Thank you for including the SSI rating.) How loud is the fan?

A: The following unit is silent in a production environment the following system produces dp levels between 30-50. which is considered silent in a production enviroment.

Q: 5. With this cable would I be able to send timecode out from my Ambient lockit (5 pin lemo) to my Zoom F6 recorder (3.5mm)?

A: While the connections of the Kondor Blue LEMO 5-Pin to 3.5mm Right-Angle Timecode Cable for ARRI ALEXA (10") are compatible with the connections of the Zoom F6 and the Ambient Lockit to send timecode, the size of the right angle LEMO connector may be too large for the Ambient to fit all ports correctly.

Q: 6. Will the Anton Bauer Titon Base (14V DC output) work for bmpcc HD (original) since it accepts only 12V input. Thanks

A: Yes, you should get the kit that includes the power cables. Anton Bauer Titon Base Kit for Blackmagic Design Pocket 4K/6K with 2-Pin Connector and LP-E6 Dummy Battery https://www.bhphotovideo.com/c/product/1596781-REG/anton_bauer_8275_0130_titon_base_kit_for.html

Q: 7. what V-Mount battery operate this Vaga 30C????

A: The Z CAM ZOLAR Vega 30C RGBAW LED Light Panel has many options for batteries. It needs to use two V mount. Best not to use batteries that are less than 150wh. This is an example, https://bhpho.to/3LaBDfe

Q: 8. Yes, the battery turn off itself when is not on use but... why after not use I still seeing the percentage that indicates that is still ON?

A: According to Anton Bauer for the Anton Bauer 68Wh Titon Base Battery: "When the battery is sitting idle (no load is applied) the LCD will show remaining capacity as percentage of full.", "When the battery is powering an item (a load is applied), the LCD will display remaining run-time in Hours/Minutes." https://bit.ly/3ovafOR

Q: 9. Does it come with a clamp to clamp the power supply to the stand?

A: There is no clamp for attaching the power supply to the light included with the ZOLAR Vega 30C RGBAW LED Light Panel.

Q: 10. Will this work with the SmallHD Cine 5?

A: Yes, the Kondor Blue Coiled D-Tap to LEMO-Type 2-Pin 0B Male Power Cable for Z CAM, SmallHD & Teradek (Black) can be used with the SmallHD CINE 5 Touchscreen On-Camera Monitor.