The tan Countryman E6i Directional Earset Mic, Low Gain with Detachable 1mm Cable and 4-pin female proprietary Connector for Fender Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6i earset's cable terminates to a 4-pin female proprietary connector for direct connection to Fender Passport wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Fender Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this cable connect my Deity Microphones V-Mic D3 Pro to Canon C70?

A: No, the Kopul XRSM 3-Pin XLR Female to 3.5mm RA Stereo Mini-Plug Cable is not compatible for connection to the Canon EOS C70 Cinema Camera which has a 3.5mm input as well as two TA3 3-pin mini-XLR inputs. The Kopul XRSM Cable has a standard size female XLR connector and you would need a mini-XLR male connector to connect the mic to the camera's mini-XLR input. You can use the Kondor Blue Mini-XLR Male to 3.5mm Stereo Mini Cable -12" (B&H # KOTRS35FBM) to connect the Deity Microphones V-Mic D3 Pro Camera-Mount Shotgun Microphone to the camera's mini-XLR input.

Q: 2. Will the Kopul XRSM cable work with a Blackmagic ATEM mini Pro Extreme in receiving audio from a Behringer Digital Audio Mixer?

A: Yes, the Kopul XRSM 3-Pin XLR Female to 3.5mm RA Stereo Mini-Plug Cable can be used to send audio from the XLR audio output of a Behringer Digital Audio Mixer to the 3.5mm TRS audio input on the Blackmagic ATEM Mini Extreme Switcher.

Q: 3. is it compatible with Tascam dr-10L?

A: This will allow you to plug a dynamic XLR mic into the DR-10L

Q: 4. What is the maximum sampling rate and bit depth?

A: The Roland RCC-10-USXF is USB 1.0 and offers 16-bit audio at 44.1 kHz. It is intended for use in connecting a dynamic microphone to a computer.

Q: 5. HOW LONG IS THIS CABLE? IS THIS IN METER?

A: 0.0381 METERS

Q: 6. I am planning to buy Sony ECM -77B. What is the difference between Kopul LMT100 cable this cable. LMT100 even cost more with less length. Can i use Kopul XRSM 3-pin female to 3.5 mm with the Sony Lav mic into DSLR/Field recorder? Then why Kopul LMT100 used for?

A: The Kopul LMT100 has a small matching transformer incorporated into the XLR connector to match the impedance in ohms between the two devices ( microphone to DSLR ). This will guarantee that your audio is on both tip and ring or left and right channels when connected to your DSLR. That is why it cost more than a regular Mic XLR to 3.5 mm.The regular XLR to 3.5 mm doesnt have this transformer which might work, but there is no guarantee because you dont know how your DSLR circuit is designed. So, my advice to you is to go with the Kopul LMT100 even though it is more expensive and shorter.Best Wishes,Ron

Q: 7. Does this fit the Crest CKi series power amplifier?

A: The Crest CKi series uses barrier strip and 4-pin Phoenix connectors, so the Hosa Technology Phoenix 3-Pole Female Connector would not be a match.

Q: 8. Will this work with the Canon R-5?

A: No, the Rollocam Camera Trigger Cable with 2.5mm Male to 3-Pin Female for Canon EOS Cameras is not compatible with the Canon R5.

Q: 9. will this cord work if running from a dynamic mic into the lav input of the wireless go?

A: You can do that. But the more common solution for that would be the Rode Interview Go which adapts the Rode Wireless Go transmitter for handheld use and it is more inexpensive than a lot of handheld mics as well. https://www.bhphotovideo.com/c/product/1548069-REG/rode_interviewgo_interview_go_handheld.html

Q: 10. I want to connect the JVC M-510 Electret Condenser Super-directional Microphone with a Nikon D750 and Nikon Z6. Will it work?

A: The mic reuires power to operate. This cable will not provide it, nor will the cameras.