The cocoa Countryman E6 Omnidirectional Earset Mic, Low Gain with Detachable 1mm Cable and TA4F Connector for Anchor Audio Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a TA4F connector for direct connection to Anchor Audio WB-6000, WB-6400, and WB-8000 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Anchor Audio Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Is this cable compatible with the Coolpix P500?

A: Yes it is, this cable is compatible with a Nikon Coolpix P500.

Q: 2. I recently lost the cable to my S8100. The original also charged the battery while it was plugged into my computer's USB port. Will this do the same?

A: Yes; the Nikon UC-E6 USB Cable (4.5') is the replacement USB cable that was originally included with the purchase of the Nikon CoolPix S8100 Digital Camera.

Q: 3. Is this cord compatible with a D500?

A: Yes

Q: 4. Can this measure how quiet a room with some accuracy or is it strictly loudness meter?

A: According to MicW, the i437L can measure sound levels as low as 30 dBA, which may be adequate for you. If you want to measure ambient levels in special rooms, such as recording studios or other spaces where sound isolation is critical, then you may need a measurement mic with a larger diaphragm (e.g. 1/2 ) to get an accurate reading of the acoustic noise floor.

Q: 5. Will this cable work with Nikon d5100 camera?

A: Yes; the Nikon UC-E6 USB Cable (4.5') is the USB cable that is originally included with the Nikon D5100 DSLR camera.

Q: 6. Does this cable work with batteries having a p-tap connector? Are d-tap and p-tap compatible or exactly the same?

A: If I'm not mistaken, D-tap (named after the shape) and P-tap (abbreviated from PowerTap) are the same connector and interchangeable. In my experience, D-tap is the more common nomenclature in the UK, whereas P-tap is more common the US (and probably Canada). The only other variety I know of is Blueshape's B-tap which is propriety and a different shape.

Q: 7. Will this work with Insta360 x3 camera?

A: No, the Saramonic LavMicro U3B Omnidirectional Lavalier Microphone with USB Type-C Connector for Android Devices (19.6' Cable) is not compatible with an Insta360 X3 camera.

Q: 8. Are these the same anchor links as on the SL2? The ones that have black outer layer, yellow, and red inner lay to warn 2 replace

A: The Peak Design Anchor Connector 4-Pack (Red/Black) can be used with the Peak Design Slide Camera Strap SL-2 (B&H # ADPESL2X).

Q: 9. Is it the correct voltage for a 5Dmk3?

A: No. The 5D operates at 7.4v, and most batteries with D-Tap are 12-14v. I used this cable with a 12v monitor.

Q: 10. Can this microphone work with the Fuji GFX50S camera? Quote from Fuji manual - "Sound can be recorded with external microphones that connect using jacks 3.5mm in diameter; microphones that require plug-in power can not be used. See the microphone manual for details." Does this microphone require plug-in power?

A: The Anchor Audio HBM-LINK is designed for use with an AnchorLink wireless transmitter and cannot connect directly to the camera's mic input because it requires plug-in power. As another option, you could use a wireless headset microphone system like the VocoPro Commander-FILM-HEADSET Camera-Mount UHF Wireless Headset Microphone System (B&H # VOCOMFILMHS1) or Galaxy Audio GT-S Trek Series - Battery-Powered, Compact Wireless Microphone System - Headset (B&H # GAGTSX). Please contact us by phone or through live chat on the website if you would like further assistance.