The tan Countryman E6i Directional Earset Mic, Low Gain with Detachable 2mm Cable and 3.5mm Connector for Comtek Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6i earset's cable terminates to a 3.5mm connector for direct connection to Comtek M-72 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Comtek Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Can I run an audio cable from a headphone jack on an audio source (say a camera, or a wireless microphone receiver) into the 3.5mm jack on this Comtek transmitter and have that transmit to the receiver for someone to monitor the audio that is coming out of the source's headphone jack?

A: Yes, you can take audio from a variety of sources, such as the headphone output of a camera and connect it into the transmitter's 3.5mm line input. This will allow that audio to be heard wirelessly by the person with the receiver.

Q: 2. Will this work with TV? Will it work with the plugged-in microphone at church? (It works fine with the microphone in the Chapel.)

A: The Comtek PR-75a AutoSmart-Tuning receiver is designed to integrate with non-compand transmitters tuned to 72-76 MHz. Both a TV and an audio system in a church would need to have a transmitter like the M-175 or BST-75 in order for the PR-75a receiver to work.

Q: 3. Will the DJI Transmission High-Gain Antennas work on the NEW DJI SDR Transmission? or does it need them?

A: The DJI SDR Transmission Combo antennas are not removable or replaceable.

Q: 4. Do these antennas work with a DJI Matrice 200 drone?

A: No, the DJI Transmission High-Gain Antenna Set (4-Pack) is not compatible with the DJI Matrice 200.

Q: 5. Will this power a SmallHD 703 UltraBright (MON-703U) monitor?

A: We are unable to verify if this would work or not. Since it is third party, an independent service technician would need to verify it's viability as a power source. But instead of that rigmarole, we would recommend this instead by SmallHD. We know this will work. SmallHD 2-Pin LEMO to Wall Power Cable (12V, 4.5A) B&H # SMPWR212V45A.

Q: 6. How is it best to clean ear buds when there are multiple users? My church won't provide the ear pieces so I bring my own.

A: You can clean your earbuds with a damp cloth and a small amount of mild soap, like a drop of dish soap. A toothbrush can be used to gently remove any wax that may be built up. There are also cleaning products available like HygenX by HamiltonBuhl (B&H # HAX19HRSB), which is specifically for cleaning headphone and earbuds.

Q: 7. Will this work with the 150M receiver as well?

A: Yes, this is compatible with the Ghost Eye 150M and 400M transmitter and receiver units.

Q: 8. What is the typical range with clear line of sight?

A: The Comtek PR-75a AutoSmart-Tuning Wireless Monitor Receiver (72 to 76 MHz) will give you a range of up to around 100-feet in the most ideal conditions.

Q: 9. what is the difference between extended low end and standard EQ?

A: The Comtek PR-75P AutoSmart-Tuning Wireless Monitor Receiver with Extended Low End boosts the low-end frequency response of the device and is more ideal for film and TV applications where more precise monitoring is required. The "standard EQ" version of the Comtek PR-75a AutoSmart-Tuning Wireless Monitor Receiver enhances speech intelligibility and is designed for tour guide and assisted listening applications.

Q: 10. This says via its 2-pin LEMO connector yet I see my receiver has 4 pins. I own the 400M unit. Am I missing something or the 2 pins will still work?

A: I have the 150m and the unit works great. I only see two pins on the power supply and two on my receiver. The pics I see on line of the 400m only show two pins and the manufacturer says it works with the 400m. Perhaps the unit you have is a different model or year than the pics I see on line, but I cannot find a 4 pin unit. Hope that helps. If you list a link with the pic of the 4 pin I will compare it to what I have and get back to you.