The black Countryman E6i Omnidirectional Earset Mic, Standard Gain with Detachable 1mm Cable and cH-style 4-pin Connector for Audio Technica Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a cH-style 4-pin connector for direct connection to Audio Technica ATW-3201 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Audio Technica Transmitters    Headroom for General Speaking    Detachable 1mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. can this mic be used with headphones for monitoring?

A: There is no headphone port on the mic. You would need to monitor the sound from the device you plug the mic into.

Q: 2. Is this compatible with the Canon 5D mark 3 camera?

A: Yes - the Canon EOS 5Dmk3 offers the requisite plug-in power .

Q: 3. Can the transmitter accept a line level signal out of a mixer?

A: The System 10 transmitter is designed to accept microphone or instrument level inputs only. Microphone/Instrument level control is managed with included screwdriver for adjusting the input level.

Q: 4. Can you use this with the Sony PXW FS7 wireless base on the camera,,,,,or do you have to run an XLR to the Camera?

A: The Audio Technica System 10 receiver requires a cable connection to the Sony PXW-FS7. Not compatible with the Sony Multi Interface shoe.

Q: 5. If I use wire for this headphone, will I get the comparable good performances like the M50x which has very good sound signature?

A: The Manufacturer number is ATHM'50X'BT2. The quality will be the same as the wired option as it is technically the same model except with Bluetooth Capabilities.

Q: 6. I have AT 3000 series wireless microphones, are the connectors on my bodypacks compatible with the System 10 connectors?

A: I wish I could answer this. Right after I acquired the equipment some events happened that have prevented me from even trying it out. Sorry - I don't know.

Q: 7. How long is the cable?

A: 6 foot long from mike to plug tip. Hope this helpsJack

Q: 8. Can you use one transmitter with multiple receivers?

A: Thank you for your question. Yes, you can use multiple receivers with one transmitter.

Q: 9. WILL THE Audio-Technica ATR4650 Omnidirectional Condenser Computer Microphone WORK ON PERSONAL DIGITAL VOICE RECORDER?

A: Yes, provided the recorder has a mic input.

Q: 10. What type of short cable is needed to connect it to a XLR female port on the camera? XLR male to XLR male?

A: The Audio Technica AT875 has a male XLR output, as do all mics with XLR. To connect to a cameras XLR input of similar XLR input device, you will need an XLR male to XLR female cable.Kopul 3000 series cables are a solid choice. a href= http://bhpho.to/1xdCvjQ target= _blank http://bhpho.to/1xdCvjQ/a